After one USB input, four USB channels are expanded through FE1.1S, which are converted into serial ports through four CH340C, and then converted into corresponding outputs, with sending indicator lights, with anti-surge, and without isolation. //200902 Successful, communication is normal, some problems have been fixed, DB9 needs to use a male connector, 4148 needs to be short-circuited, and the file has been modified. ----------200823-------- The PCB welding is completed, but the 232 chip is not available, so it is empty. The test video is at station B https://www.bilibili.com/video/BV1tv411i7iX/ Here is a high-definition picture (picture .CR2 is attached) (the board is not washed)
All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.
It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.
Supported by EEWorld Datasheet