红水杯

Evaluation kit environment for the L62xx series of dual-brush DC and stepper motor drivers based on STM32 Nucleo

Evaluation kit environment for L62xx family of dual brush DC and stepper motor drivers based on STM32 Nucleo

Overview

The EVL62XX-MAIN is an expansion board that can host small EVL62XX-PLUG plug-in boards for quick and easy evaluation of brush DC and stepper motor drivers of the L62xx family.
[EVL62XX-PLUG]
These boards provide an affordable and easy-to-use solution to drive dual brush DC and bipolar stepper motors in association with the evaluation software STSPIN Studio.
The EVL62XX-MAIN is compatible with the Arduino UNO R3 connector.

所有功能
Voltage range from 8 V to 52 V
Phase current up to 2.8 A r.m.s (with L6205, L6206, L6207 and L6208 devices) or 1.4 A r.m.s. (with L6225, L6226, L6227 and L6228 devices)
Easy interchangeable plug-in boards for quick evaluation of the whole stepper and brush DC drivers of the L62xx family
Programmable high-side overcurrent protection (L6206 and L6226 devices)
Programmable OFF-time of the PWM current control (L6207, L6227, L6208 and L6228 devices)
Compatible with Arduino UNO R3 connector
RoHS compliant

Design Files

Documentation

Related Devices

Devices	Class	introduce	Datasheet
EVL6226-PLUG		Evaluation kit environment for L62xx family of dual brush DC and stepper motor drivers based on STM32 Nucleo	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-15 01:48:57

An oscilloscope can only measure waveforms? That’s too narrow!
Author: Huang Gang, a member of Yibo Technology Expressway MediaIn traditional cognition, the main function of an oscilloscope is to test an input waveform, play the role of a passive input waveform a
Questions about System Control Block
I can't find any relevant information about SCB in the STM32 data sheet, and I can't find any exact information in the ARM M3/M4 data. Can anyone provide me with detailed information? Thank you.
[AB32VG1 Development Board Review] RGB_LED Color Change Display
The AB32VG1 development board has an RGB_LED on board, and its schematic diagram is shown in Figure 1.Figure 1 RGB_LED circuit connection According to the principle of color superposition, yellow, bri
Playing with Zynq Serial 2——GPIO peripherals of Zynq PS
Overview TheZynq GPIO peripheral controls up to 54 MIO pins and can also be connected to the PL through the EMIO interface (supporting up to 64 input pins or 128 output pins). The GPIO peripheral can
Ask the big guy, about the problem of DS1302
I have been making instruments recently. I have made several DS1302s with existing chips. They all worked properly. Then I didn't have enough new DS1302s, so I bought a domestic DS1302 from a gold med
Why is DS heavily doped in the MOS tube structure?
I watched Razavi's video and he said that the purpose of heavy doping is to make good contact with silicon and avoid diode and rectifying junction. Is this diode BS BD? And what is the reason for good

Datasheet More

Circuits More