Lemontree

APMOTOR56F8000: Motor Control Demonstration System

Overview

The Motor Control Demonstration System for the NXP^® 56F801x and 56F800x Digital Signal Controllers is designed to provide a ready-made software development platform for small brushless DC motors.

The motor can be controlled via its Hall effect sensor or via sensorless technology.
The system can be used to develop real-time software and hardware products.
Provides the necessary features to write, debug, and demonstrate software functionality

Kit contains

APMOTOR56F8000 Kit Installation Guide
APMOTOR56F8000 motor control daughter card for DEMO56F8013 or DEMO56F8013-E
Presentation software

MoreCollapse

Design Tools & Files:OrCAD Schematic Design file for 56F8000 Motor DEMO board

Design Tools & Files:Assembly GERBER files for 56F8000 Motor DEMO board

Design Tools & Files:Fabrication GERBERS for 56F8000 Motor DEMO board

Design Tools & Files:PDF plots of 56F8000 Motor DEMO board GERBER files

Design Tools & Files:PADS PCB Layout for 56F8000 Motor DEMO board

Design Tools & Files:Fabrication and Assembly Drawings for 56F8000 Motor DEMO board

56F8000E Motor Control Daughter Card Kit Installation Guide - Fact Sheet

56F800, 56F8300/8100, 56F8000 and 56850 Series Hardware Development Tools

Digital Signal Processors and Controllers, SG1004

3841

electronic

Design Files

Documentation

Related Devices

Devices	Class	introduce	Datasheet
56F801X		Digital signal controller for motor control applications	Download
56F800x		MC56F8006 and MCF56F8002 Digital Signal Controllers	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 18:45:24

Disassembling a 32G USB flash drive
[i=s]This post was last edited by Gravity Platform on 2019-5-11 09:26[/i] [align=center]DIY&Share—GravityShare [/align] [hr] [align=left]USB flash disk has become one of the most frequently used devic
STM32MP157A-DK1 evaluation + GO language web service (5)
Now many embedded devices with network ports provide web-based configuration tools. I have recently been learning about the GO language, and some information says that the cross-platform characteristi
MSP432 serial port 0 transceiver
The two pins of serial port 0 are P1.2 and P1.3代码： #include ti/devices/msp432p4xx/driverlib/driverlib.h uint8_t TXData = 1; uint8_t RXData = 0; /* UART Configuration Parameter. These are the configura
The algorithm of digital filtering in single chip microcomputer
The main function of a single-chip microcomputer is to control peripheral devices and realize certain communications and data processing. However, in certain specific occasions, mathematical operation
TI Wireless Connectivity Technology Selection Guide
Selecting the right wireless connectivity technology is a critical design decision from the outset. This determines the protocol interoperability, distance, robustness, and use cases of the applicatio
Adding SDCard functionality to ESP32-S3 with MicroPython
In the latest update, MicroPython added SDCard support for the ESP32-S3esp32: Add SDCard support for S3, and a GENERIC_S3_SPIRAM board.

Datasheet More

Circuits More