smallembedded

Ultra-mobile, ultra-low-power display reference design using DLP® technology

TIDA-00325

Overview

This reference design features TI's DLP2010 (.2 WVGA) DMD chipset and is designed to enable ultra-low power and ultra-mobile displays either embedded into systems (e.g. smartphones, tablets, etc.) or as a standalone add-on module application. This chipset is used in designs containing the DLP2010 (.2 WVGA) DMD, DPC3435 display control, and DLPA2005 PMIC/LED driver.

characteristic

● Reference design for the DLP2010 chipset, which includes the DLP2010 DMD, DLPC3435 controller and fully integrated DLPA2005 PMIC/LED driver
● Reference design implemented on an EVM containing a production-ready light engine with programmable LED driver (0 - 650 mA) for RGB LEDs
● Contains standard HDMI input interface that can be connected to any display device
● Simple but powerful USB-based GUI to help you get started quickly
● This reference design is tested and implemented on the EVM, which can be ordered through ti.com, and includes firmware, GUI, and getting started guide.

Backlog Impt notice changes Backlog Impt notice changes end

Blockdiagram

Design Files

Documentation

TIDA-00325 Test Results

Related Devices

Devices	Class	introduce	Datasheet
DLP2010	semiconductor;Other integrated circuit (IC)	DLP2010 DLP? 0.2 WVGA DMD	Download
DLPA2000	semiconductor;Other integrated circuit (IC)	DLPA2000 PMIC/LED Driver for DLP2010 (0.2 WVGA) DMD	Download
DLPC3435	semiconductor;Other integrated circuit (IC)	DLPC3435 DLP® Display Controller for DLP2010 (0.2 WVGA) DMD	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 13:41:07

Resistor Programmable Oscillator
Building a clock should be one of the simplest engineering design tasks, unless you need it to be small, stable, and adjustable. 　　Some traditional approaches require a 555-type timer, or a comparator
BYD e6 battery pack battery management system
[i=s]This post was last edited by qwqwqw2088 on 2019-4-1 20:39[/i] [size=4]1. BYD e6 electric vehicle battery pack[/size] [size=4] The e6 electric vehicle uses lithium iron phosphate battery, also kno
Reward for help to convert these two files into altium designe can open
TMS320C54x DSP CPU and Peripherals (Part 2)
Chapter 3 Data AddressingC54x provides seven types of addressing modes: lImmediateaddressing Absoluteaddressing lAccumulatoraddressing Directaddressing Indirectaddressing Memory -mapped register addre
Buck circuit principle and PCB layout and wiring considerations
Buck architecture:When the switch is closed:When the switch is off:According to the volt-second balance theorem, we can get: (Vin-Vout)*DT=Vout(1-D)T===Vin/Vout=D1In actual DCDC applications:When Q1 i
Simple method of calculating multiplication and division in assembly
In fact, there are also large data in the assembly program, even more than 2 words, and 4 operations, addition and subtraction, multiplication and division. At this time, multiple bytes of operations

Datasheet More

Circuits More