蓝猫淘气

Single high-end driver based on IPS161H

STEVAL-IFP034V1

Overview

The STEVAL-IFP034V1 evaluation board is designed to analyze the IPS161H device functionality.

It provides galvanic isolation between the user interface and the power interface through optical isolation implemented with optocouplers OPTO1 for forward signals to the device and OPT2 for diagnostic feedback signals.
IEC 61000-4-2, IEC61000-4-4 and IEC 61000-4-5 compliance is achieved by the IPS161H itself and the U1 component (the external TVS between V_CC supply rail and power ground).
A dedicated GUI interface helps you test IPS161H functionality. To use it, ensure the STEVAL-IFP034V1 is connected via a 30-way flat cable to a STEVAL-PCC009V2, which is connected via USB to the PC running the GUI.

Main features

Operating voltage range: 8 to 60 V
Operating current: 0.5 A max
Programmable cut-off delay time
Reverse polarity protection
Galvanic isolation on PCB
Input pins compatible with V_CC rails

Green LED for channel ON/OFF status
Red LED for Common Diagnostics on:
- open load in OFF state
- cut-off
- thermal protection
Microcontroller interface
Compliant with IEC 61000-4-2, IEC61000-4-4 and IEC 61000-4-5
RoHS compliant

Design Files

Related Devices

Devices	Class	introduce	Datasheet
IPS161H		Current Limit SW 1-IN 1-OUT 6.9V to 60V 1.7A 12-Pin PowerSSO EP Tube	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 13:59:20

Analysis of the three most commonly used communication protocols in single-chip microcomputer systems
As the name implies, it is a serial peripheral interface. SPI is a high-speed, full-duplex, synchronous communication bus. The standard SPI also uses only 4 pins and is often used for communication be
DSP external device connection interface EMIF
The external device connection interface includes the external memory connection interface (EMIF), the host interface (HPI), etc. The external memory interface is mainly used to connect with parallel
How to understand the relationship between time window and RBW in FFT
As a commonly used spectrum analysis tool, Fast Fourier Transform (FFT) realizes the conversion from time domain to frequency domain and is one of the most commonly used basic functions in digital sig
Retro light bulb wicks, Edison LED wick samples have arrived
In fact, it is an LED light strip, which is made into various specifications by connecting in series and parallel, and the surface is covered with yellow fluorescent powder.
Find a domestic single-chip microcomputer
[i=s] This post was last edited by feifeizhuer on 2019-4-10 17:29 [/i] The package is TSSOP16, 5 pins for VDD, 6 pins for ground, 15 and 16 pins should have comparator function; it should be 8-bit. I
FreeRTOS v10.1.0 source code Chinese annotated version
As the title says, I would like to share my own Chinese comments on the FreeRTOS v10.1.0 source code to help beginners get started. The link is as follows: [url]https://github.com/xupenghu/LearningFre

Datasheet More

Circuits More