containsmachine

L6208 DMOS driver for bipolar stepper motor evaluation board in PowerDip package

EVAL6208N

Overview

The EVAL6208N is built around L6208 in PowerDip package. It implements a typical stepper motor driver application. Screw connectors provide connection to motor supply rail and 5 V reference for the logic inputs, as well as the four outputs to motor windings. EVAL6208N can be hooked-up to practiSPIN interface board (EVALpractiSPIN) through a 34-pin connector. It is also possible to run board in stand-alone mode: four switches are used to set the direction of the rotation, the stepping sequence and the current decay style, while four potentiometers set the L6208 reference voltage and off-time for the PWM current control; external reference voltages can be provided by a PWM output of a µC.

Main features

DECODING LOGIC FOR STEPPER MOTOR FULL AND HALF STEP DRIVE
RECTIFICATION
THERMAL SHUTDOWN
CROSS CONDUCTION PROTECTION
UNDER VOLTAGE LOCKOUTINTEGRATED FAST FREE WHEELING DIODES
FAST/SLOW DECAY MODE SELECTION
DUAL INDEPENDENT CONSTANT t_OFF PWM CURRENT CONTROLLERS

OPERATING SUPPLY VOLTAGE FROM 8 TO 52V
RDS(ON) 0.3W TYP. VALUE @ T_j = 25°C
5.6A OUTPUT PEAK CURRENT (2.8A RMS)
NON DISSIPATIVE OVERCURRENT PROTECTION
FAST DECAY QUASI-SYNCHRONOUS
OPERATING FREQUENCY UP TO 100KHz

Design Files

Related Devices

Devices	Class	introduce	Datasheet
L6208	semiconductor;Analog mixed-signal IC	STEPPER MOTOR CONTROLLER, 5.6 A, PDSO36	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-14 23:30:58

UC3525 extended duty cycle solution
Frank Xiao The DC/DC converter control chip UC3525 has been in use for more than 20 years and is still one of the most common PWM (pulse width modular) controllers on the market. It integrates control
GD32VF103 serial port of Gigabit RISC-V core reads PM2.5 sensor
[i=s]This post was last edited by Hot Ximixiu on 2021-8-6 07:16[/i]Sensor: Panteng PMS5003;Hardware connection:VCC -- 5VGND -- GNDTX -- PB11 (RX2)RX -- PB10 (TX2)Basic process1. Connect the sensor to
Summary of the basic knowledge of lead-acid batteries
[i=s]This post was last edited by qwqwqw2088 on 2021-7-19 10:24[/i]
Want to build a smart home, how to start? Receive this collection of information
Smart home is a field that has been attracting much attention in recent years. With the continuous development of technologies such as 5G industry, cloud computing, AIoT, and big data, the market dema
Problems with the 5V3-pin DCDC voltage reference chip
I used a 3.3V 3-pin DCDC reference source chip REF2933 before. Now I find that it is not suitable and I need a 5V one. Has anyone used a 5V 3-pin DCDC voltage reference chip? Can you recommend one? Th
TI prize live broadcast pre-registration is waiting for you to watch~
[font=微软雅黑][size=14px][size=3][color=#ff0000] [/color][/size][/size][/font] [font=微软雅黑][size=14px][size=3][color=#ff0000][b]Live Topic:[/b][/color] [/size][/size][/font][url=https://www.eeworld.com.cn

Datasheet More

Circuits More