JFET

2000 W motor control power board based on STGIB20M60TS-L SLLIMM? Second Series IPM

STEVAL-IPM20B

Overview

The STEVAL-IPM20B is a compact motor drive power board equipped with the SLLIMM (small low-loss intelligent molded module) 2nd series module STGIB20M60TS-L. It provides an affordable, easy-to-use solution for driving high power motors for a wide range of applications such as white goods, air conditioners, compressors, power fans, high-end power tools, and generally 3-phase inverters for motor drives.

The IPM itself consists of short-circuit rugged IGBTs and a wide range of features including undervoltage lockout, smart shutdown, temperature sensing and NTC inside, and overcurrent protection.
The main characteristics of this evaluation board are its small size, minimal BOM and high efficiency. It consists of an interface circuit (BUS and V_CC connectors), bootstrap capacitors, snubber capacitor, hardware short-circuit protection, fault event signal and temperature monitoring. It is designed to work in single or three-shunt configuration and with two current sensing options: three dedicated op-amps on the evaluation board, or op-amps available on a connected microcontroller. A Hall/Encoder section completes the circuit.
The system is designed to achieve accurate and fast conditioning of current feedback to satisfy the typical requirements for field-oriented control (FOC).
The STEVAL-IPM20B is compatible with ST control boards based on STM32 microcontrollers, providing a complete platform for motor control.

Main features

Input voltage: 125 - 400 VDC
Nominal power: up to 2000 W
- Allowable maximum power is related to the application conditions and cooling system
Nominal current: up to 12 A_rms
Input auxiliary voltage: up to 20 V DC
Single- or three-shunt resistors for current sensing (with sensing network)
Two options for current sensing: dedicated op-amps or through MCU
Overcurrent hardware protection
IPM temperature monitoring and protection

Hall sensor or encoder input
IGBT intelligent power module:
- SLLIMM™ 2nd series IPM (STGIB20M60TS-L - DBC package)
Motor control connector (32-pin) to interface with ST MCU boards
Universal conception for further evaluation with breadboard and testing pins
Very compact size
WEEE compliant
RoHS compliant

Design Files

Related Devices

Devices	Class	introduce	Datasheet
STGIB20M60TS-L	semiconductor;Power management IC;Motor/sport/ignition controller and driver	Motor/Motion/Ignition Controllers and DriversSLLIMM 2nd series IPM, 3-phase inverter, 25 A, 600 V short-circuit rugged IGBT	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 12:44:03

Qorvo Launches First Smart Home Device Controller to Enable Simultaneous Wireless Communications
Qorvo's new QPG6100 communications controller for IoT end devices features the company's ConcurrentConnectTM technology, an innovative technology that accelerates communications, increases home networ
Do you have any recommendations for a pure button phone for the elderly?
The requirements were simple: answering and making calls, a keypad or flip phone. I thought the flip phone was better because I could hang up the phone at any time and I didn't need to unlock it to tu
【TGF4042 signal generator】+ resolution test
The TGF4042 function generator uses a 14-bit DAC with a main frequency of up to 400 MHZ. The manual clearly indicates the frequency resolution, but does not clearly indicate the amplitude resolution.
Transplantation of μC/OS-II Real-time Operating System to 51 Single-Chip Microcomputer
[size=4] μC/OS-II is an open source, compact, and preemptive real-time kernel embedded development system. The code is short, clear, and has high real-time and security performance. Most of the code i
Interpretation of FFT data of IPC communication of TL5708 development board
# Interpretation of FFT data of IPC communication of TL5708 development board **Table of Contents** [TOC] ## 1. The actual set waveform parameters The signal input to the DSP core is as follows: Initi
Power Supply Design Guidelines for Wireless Modules
Wireless communication has already penetrated into people's lives. There are more and more companies designing wireless modules, and more and more friends are engaged in RF design. The following are s

Datasheet More

Circuits More