JFET

EVSPIN32F0601S3 three-phase inverter based on STSPIN32F0601 3-shunt topology

EVSPIN32F0601S3

Overview

The EVSPIN32F0601S3 board is a 3-phase complete inverter based on the STSPIN32F0601 controller, which embeds a 3‑phase 600 V gate driver and a Cortex^®‑M0 STM32 MCU. The power stage features STGD6M65DF2 IGBTs, but can be populated with any IGBT or Power MOSFET in DPAK or powerFLAT 8x8 HV package.

The board has a three-shunt sensing topology, and the field-oriented control (FOC), either sensored or sensorless, can be implemented. This makes it especially suited to drive permanent magnet synchronous motors (PMSMs).

The evaluation board is compatible with a wide range input voltage from 50 V to 280 V DC/AC, and includes a power supply stage with the VIPER06XS in flyback configuration to generate +15 V and +3.3 V supply voltage required by the application.

Debug and configuration of FW can be performed with standard STM32 tools through the detachable STLINK‑debugger. SWD and UART TX‑RX connectors are also available.

Main features

Input voltage from 50 V to 280 V DC/AC
STGD6M65DF2 IGBTs power stage featuring:
- V _(BR)CES = 650 V
- V_CE(sat) = 1.55 V @ I_C= 6 A
Overcurrent threshold set to 4.5 A_peak
Dual footprint for IGBT/MOSFET package:
- DPAK
- PowerFlat 8x8 HV
3-shunt current sensing, suitable for: sensored or sensorless vector control - FOC algorithm with 3-shunt sensing
Smart shutdown overcurrent protection

Digital Hall sensors and encoder input
Bus voltage sensing
15 V VCC and 3.3 V VDD supplies
Embedded ST-LINK/V2-1
Easy user interface with buttons and trimmer
RoHS compliant

Design Files

Related Devices

Devices	Class	introduce	Datasheet
STSPIN32F0601		600V three-phase controller equipped with MCU	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-15 02:27:22

Ask a question about operating ESP8266 with STM32
[table=98%] [tr][td]I would like to ask a question: If I comment out this line of code, UART2_Send_1Byte(res);, the ESP8266 WIFI module cannot be initialized; but if I add UART2_Send_1Byte(res);, it c
How to write pointer array in stm32
as follows: code u8 STB1[][3]={}; code u8 STB2[][3]={};code u8 code *std[]={STB1,STB2}; This worked in 51 before, but there was a problem when ported to 32 (code has been changed to const). Error mess
[Evaluation of domestic FPGA Gaoyun GW1N-4 series development board]——12. Two tips (multi-function pins and board silk screen)
[i=s]This post was last edited by gs001588 on 2022-1-22 22:43[/i][Evaluation of domestic FPGA Gaoyun GW1N-4 series development board]——12. Two tips (multi-function pins and board silk screen)Tips (1):
What are the units of divergence and curl used in electromagnetic fields?
What are the units of divergence and curl used in electromagnetic fields?
Questions about the CAN bus ID part
This is my first time to use CAN bus. Recently, I need to send and receive data through CAN bus. When I use microcontroller to send ID=0x401, I check the waveform and find that the actual data sent is
Is this a series voltage regulator circuit?
There are two main issues here: 1) How are the 2Ω of R150 and the 300Ω of R151 calculated? Or is it an empirical value? Is the 300Ω just used for current limiting of the voltage regulator BZX84-B13? 2

Datasheet More

Circuits More