qoistoochee128

Bluetooth low energy expansion board based on BlueNRG-M0 module for STM32 Nucleo

X-NUCLEO-IDB05A2

Overview

The X-NUCLEO-IDB05A2 Bluetooth low energy expansion board is based on the BlueNRG-M0 BLE network processor module.

The BlueNRG-M0 is Bluetooth v4.2 compliant, FCC and IC certified (FCC ID: S9NBNRGM0AL; IC: 8976C-BNRGM0AL). It supports simultaneous master/slave roles and can behave as a Bluetooth low energy sensor and hub device at the same time.
The BlueNRG-M0 provides a complete RF platform in a tiny form factor, with integrated radio, antenna, high frequency and LPO oscillators.
The X-NUCLEO-IDB05A2 is compatible with the ST morpho (not mounted) and Arduino UNO R3 connector layout.
The X-NUCLEO-IDB05A2 interfaces with the STM32 microcontroller via the SPI pin and allows changing the default SPI clock, SPI chip select and SPI IRQ by replacing a resistor on the expansion board.

Main features

STM32 Nucleo expansion board based on the BlueNRG-M0 Bluetooth v4.2 compliant, FCC and IC certified module (FCC ID: S9NBNRGM0AL; IC: 8976C-BNRGM0AL)
BlueNRG-M0 main features:
- Embedded Bluetooth low energy protocol stack (GAP, GATT, SM, L2CAP, LL, RFPHY)
- Embedded BlueNRG-MS network processor
- On-board chip antenna
Small form factor: 11.5 mmx13.5 mm
Equipped with Arduino UNO R3 connector
Scalable solution capable of cascading multiple boards for larger systems
Free comprehensive development firmware library and samples for BlueNRG-MS, compatible with STM32Cube firmware
RoHS compliant

Design Files

Related Devices

Devices	Class	introduce	Datasheet
BlueNRG-M0		Extremely low power network processor module for Bluetooth® low energy v4.2	Download
BlueNRG-MS		Bluetooth low energy network processor supporting Bluetooth 4.2 core protocol specification	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-14 23:26:03

Improving the efficiency of microcontroller code execution
1. The for loop uses - - method C language will generate assembly language, and in assembly language, there is an instruction that is not equal to 0. The - - method used in for only uses one assembly
Propose a product direction for companies with technical capabilities
Portable personal home stone detection spectrometer This thing is not expensive but has a huge market
Correctly understand the amplification region, saturation region, and cutoff region of the transistor
Analog circuits are very important , and the application of transistors in analog circuits is of paramount importance. Being able to correctly understand the amplification region, saturation region, a
[Analog Electronics Course Selection Test] + Operational Amplifier Type Application
This content is originally created by EEWORLD forum user hpq916 . If you want to reprint or use it for commercial purposes, you must obtain the author’s consent and indicate the source
Detailed schematic of LTC2380-24 (preferably single-ended input to differential)
I recently wanted to use LTC2380-24 as my acquisition, but there are two problems 1. There are some resistor and capacitor opts on the official evaluation board, but I don’t really understand how to c
What is the power-off mode? Generally, to save power, you just need to put it in standby mode. To exit the power-off mode, you can only do a hardware reset...
What is the power-off mode? Generally, to save power, you just put it in standby mode. To exit the power-off mode, you can only use hardware reset, not interrupts. Why?

Datasheet More

Circuits More