650 V 400 A six-cell automotive qualified IGBT module

650 V 200 A six-cell automotive qualified IGBT module

small engine control

This reference design board supports the NXP® MM912_P812 engine control IC, which combines an MCU (S12P) and an analog control chip (MC33812), and is suitable for motorcycles and other single/double-cylinder small engine control applications.

The analog control IC consists of three integrated low-side drivers, a pre-driver, a +5.0 V voltage pre-regulator, an MCU watchdog circuit, an ISO 9141 K-Line interface and a parallel interface for MCU communication.

The archived content will no longer be updated and is for historical reference only.

Schematic PCB

S32K148 Automotive Telematics Box (T-Box)

Schematic PCB

First generation electric vehicle power inverter control reference platform

S12P and MC33812 Small Engine Control Reference Design

Schematic PCB

K series hydraulic/pneumatic valve controller system

This valve controller system uses SB0800 octal valve controller IC with MCU and two power MOSFETs. The system can drive proportional and digital valves as well as system pumps. Monitoring and protection features protect the system from hazardous events such as short circuits, overcurrent or overvoltage, and other abnormal conditions.

12 V lead-acid battery management system with LIN

The RD9Z1-638-12V is a battery management system (BMS) designed to demonstrate the capabilities of the MM9Z1J638 battery sensor module in 12 V lead-acid applications where high EMC performance is required to obtain high-precision measurements of critical battery parameters.

Schematic PCB

12 V lead-acid battery sensor with CAN

RD9Z1-638-12V is a battery management system designed to demonstrate the capabilities of the MM9Z1J638 battery sensor IC in 12 V lead-acid applications where high EMC performance is required to obtain high-precision measurements of critical battery parameters.

Schematic PCB

Reference design for eCar and eBus hybrid centralized distributed architecture battery management system in automotive applications

High Voltage Battery Junction Box Reference Design

High Voltage Battery Junction Box Reference Design

The RD9Z1-638BJBEVM is a hardware tool for evaluation and development, ideal for rapid prototyping of high-voltage battery junction boxes (HV-BJBs) in electric vehicles. This board evaluates the functionality of the RD9Z1-638BJBEVM device and allows the user to connect to a power distribution unit (PDU) for voltage, current, temperature sensing and contactor status diagnostics.

The RD9Z1-638BJBEVM reference design can help accelerate your project development. It is a flexible, independent function board with high integration, smaller size, and compatibility with electric vehicles and electric buses.

Schematic PCB

MPC5775B BMS and VCU Reference Design

Schematic PCB

Second generation electric vehicle power inverter control reference platform

HVBMS Battery Junction Box (BJB) using ETPL and MC33772C

HVBMS battery management unit with S32K344(BMU)

HVBMS Centralized Cell Monitoring Unit (CMU) capable of CAN FD communication via MC33775A

Schematic PCB

Three-phase inverter reference design using GD3162 with HybridPACK driver

Battery Management Control

NFC access control and battery communication for electric mobility scooters