This board is a Swiss Army Knife for IoT security researchers, developers, and enthusiasts. The board can be used with different types of software, including third-party sniffers such as SmartRF Packet Sniffer, Sniffle, zigbee2mqtt, Z-Stack-firmware, Ubiqua Protocol Analyzer, our custom firmware, or you can even Specific software requires writing your own software.
This fully tested reference design demonstrates a low-power solution for electronic measurement of water flow with a mechanical flow meter and provides a single-chip platform for water flow measurement and wireless communications. The design is ideal for automatic water meter reading (AMR) modules, which add wireless communications capabilities to existing mechanical flow meters. The radio frequency subsystem supports standard protocols such as wireless M-Bus or proprietary protocols in the sub-1GHz ISM band. This reference design provides the ability to accurately read mechanical rotation over long distances and provides greater reliability. Ultra-low power consumption reduces battery requirements and extends product life.
ZigBee Lighting Reference Design with EMR32MG1 and PCB Antenna
ZigBee Lighting Reference Design with EM3585 and PCB Antenna
ZigBee Lighting Reference Design with EM357 and PCB Antenna
ZigBee USB Virtual Gateway Reference Design Using EM3588
ZigBee Wi-Fi Ethernet Gateway Reference Design Using EM3588
This document describes the Telegesis ETRX2-PA ZigBee module, which is designed to be integrated into another device and provide a fast, simple and low-cost wireless mesh network interface. Unless explicitly stated, the content also applies to ETRX2HR-PA modules that use a Hirose U.FL coaxial antenna connector in place of the onboard ceramic antenna. Users cannot convert ETRX2-PA to ETRX2HR-PA or vice versa. The Telegesis ETRX2-PA module is based on the Ember ZigBee platform, which consists of the single-chip EM250 and the EmberZNet mesh stack compliant with the ZigBee PRO standard. Integrating the simple-to-use AT style command interface and advanced hardware design, a wide range of applications can be easily implemented. Configurable functionality often allows the use of the ETRX2-PA wireless mesh module without the need for an additional host microcontroller, saving even more integration time and cost. In addition to the Telegesis AT command set, the ETRX2-PA can be used with custom built firmware or the Ember EZSP based UART protocol interface... No RF experience or expertise is required to add this powerful wireless networking capability to our of products. ETRX2-PA offers fast integration opportunities and the shortest possible time for marketing your products.
The reference design demonstrates a complete 2.4GHz ZigBee IEEE 802.15.4 based compliant radio transceiver solutions and conform to FCC CFR47 part 15. The wireless SoC reference design series (RFMDs RF6505/6575/6555) are developed by the partnership between RFMD and Corporation. The RFMD device increases transmit power and sensitivity.
FRDM-KW41Z Development Kit for KW41Z/31Z/21Z MCUs features Cortex-M0+ and 2.4 GHz radio, compliant with Bluetooth Smart/Low Energy (BLE) v4.2 and IEEE 802.15.4 protocols
Based on the modular IoT framework, NXP provides an IoT use case-specific integrated development experience (IDEx) suite to accelerate IoT system development with pre-integrated, comprehensive and fully documented out-of-the-box IoT system solutions.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
circle
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
