The RD9Z1-638-12V is a battery management system (BMS) designed to demonstrate the capabilities of the MM9Z1J638 battery sensor module in 12 V lead-acid applications where high EMC performance is required to obtain high-precision measurements of critical battery parameters.
RD9Z1-638-12V is a battery management system designed to demonstrate the capabilities of the MM9Z1J638 battery sensor IC in 12 V lead-acid applications where high EMC performance is required to obtain high-precision measurements of critical battery parameters.
This DIY LiPo super charger can charge a single LiPo battery and protect it from overvoltage, overload and short circuit. In addition, it can boost the battery voltage to 5 V or 12 V. The boosted output voltage is protected by an "eFuse" IC with a maximum output current of 1.52 A at 5 V and 0.76 A at 12 V. The charger part of the circuit requires a +5V power supply, which can be connected via USB-C, or simply solder two wires to pads on the PCB. Additionally, other connections can be soldered to pads on the PCB or use individual pin headers.
A 100W fast-charging mobile power supply based on the IP5389 chip solution, equipped with an OLED display that can display battery power and temperature.
EV2400 based on MSP430F5529, paired with BQStudio, is suitable for debugging Ti series lithium battery protection chips
snapVCC is a highly portable and convenient power supply for your electronics projects. It's designed to fit a 9V battery and provide you with 3.3V or 5V power wherever you need it. What can you do with snapVCC? Many circuits require a regulated 3.3 or 5 volt power supply. 9V batteries are an easily available power option. A common method of using a 9V battery to power a circuit is to use a linear regulator IC circuit to step down the voltage.
The Ant2 is a tiny USB-C lithium polymer charger that measures just 16 x 9mm, just larger than the USB Type-C connector itself. It is the smallest charger in its class. Ant2 can be used to add USB-C power and battery charging support to space-constrained prototypes and projects. The small size also makes it easier to retrofit USB-C power into your old projects.
ANT BBPS displays voltage, current and power on an OLED display. It features digitally controlled current limit, wide input voltage range and up to 12 V DC output. It also has two input connections, a USB type-C connector and a screw terminal. A USB input means a battery pack can easily be used as your power source, and the screw terminals allow any other input source to be connected, such as AA and 9 V batteries, or even that old 7 V wall adapter you might have lying around.
The MAXREFDES1219 is an integrated smart solution for the 1-cell Li+ battery pack that provides a linear charger
The MAXREFDES1277 reference design enables quick evaluation of the MAX17852/53 for 48V two-Wheeler battery management applications (BMS)
The requirements for higher quality and performance in digital SLR cameras, DSC, and other 2S Li+ battery electronic equipment is increasing.
The most commonly used lithium battery protection circuit drawing, 4 strings
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
circle
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
