Unboxing

reflectometry

Unboxing [Copy link]

【GD32L233C-START Review】Unboxing Report

Before the Lunar New Year, I applied to participate in the GigaDevice GD32L233C new experience to start the energy-saving "chip" era! event. I originally planned to use the long time during the Lunar New Year to study this board, but plans can't keep up with changes, and I didn't make the right calculations. I received this board after the Lunar New Year^_^.

I saw someone in the group saying that the board they received was scratched by a cat, as shown below:

I quickly unpacked the box and carefully checked whether the board I received had been scratched. Fortunately, the board was intact and there was no problem. I was relieved.

I carefully examined the MCU under a microscope .

The GD32L233C-START development board uses the GD32L233CCT6 MCU, as shown above. The evaluation board uses a Mini USB interface to provide power. The GD32L233 series MCU has a maximum clock frequency of 64MHz and integrates 64KB to 256KB of embedded eFlash and 16KB to 32KB of SRAM . Arm Cortex-M23 core .

I carefully read the GD32L233C-START evaluation board user guide . The development board comes with a complete set of related DEMOs. You can download the required information from the EEWORLD activity interface, or you can download the latest standard firmware library from the official website http://gd32mcu.com/cn/download?kw=GD32L2 . In general, the development board and chip information is very complete.

freebsder

Thanks for sharing! Looking forward to the follow-up.

led2015

Looking forward to the power-on process and experimental process later, it would be best if I could do it step by step.

lugl4313820

It is impossible for us to send you a defective development board, not to mention that it is a product for review, and it is just a face-saving project. You can rest assured!