BlueNRG-x Documentation - Downloads and Software Installation

littleshrimp

BlueNRG-x Documentation - Downloads and Software Installation [Copy link]

 

Download information and software installation

Search for “BlueNRG-1” “BlueNRG-2” “BlueNRG-LP” in the search box of www.st.com to find the corresponding information homepage.

BlueNRG-LP Information Home

BlueNRG-2 Information Home

For BlueNRG-1 and BlueNRG-2N (coprocessor), you can refer to the BlueNRG-2 data. For other older products, BlueNRG-MS, the search is similar.

BlueNRG-LP development requires downloading and installing software or tools

To develop BlueNRG-LP, you generally need to download the following software. The following tool software provided by ST can be jumped through the Tools & software column on the chip homepage. Currently, only window operating system development is supported, and Linux operating system and MAC OS are not supported.

Third-party compilation tools:

• Keil or IAR // Need to select at least one tool
• Git // Recommended installation
• Source insight or vscode // It is recommended to install one

ST recommends downloading and installing software or tools:

STSW-BNRGLP-DK // SDK source code

STSW-BNRG001 // BlueNRG Power Consumption Evaluation Tool

STSW-BNRGFLASHER // Download tool

STSW-BNRGUI // RF test protocol stack learning or evaluation tool

Optional download and installation software or tools provided by ST:

STSW-BNRGLP-Mesh // Optional installation, Mesh SDK

Software or tools that need to be downloaded and installed for BlueNRG-1/2 development

Third-party compilation tools:

• Keil or IAR // Need to select at least one tool
• Git // Recommended installation
• Source insight or vscode // It is recommended to install one

ST recommends downloading and installing software or tools:

STSW-BLUENRG1-DK // SDK source code

STSW-BNRG001 // BlueNRG Series Power Consumption Evaluation Tool

STSW-BNRGFLASHER // BlueNRG Series Download Tool

STSW-BNRGUI // BlueNRG series RF test protocol stack learning or evaluation tool

Optional download and installation software or tools provided by ST:

STSW-BNRG-Mesh // Optional installation, Mesh SDK

Development environment construction

It is recommended to install all software in the default path. After installing the SDK, you can open the data index and project source directory through the guide as shown in the figure below.

BlueNRG-x data index and engineering source code directory:

• BlueNRG-LP data index:

  • C:\Users${user name}\ST\BlueNRG-LP DK xxx\Docs\index.html

• BlueNRG-1/2 Data Index:

  • C:\Program Files (x86)\STMicroelectronics\BlueNRG-1_2 DK 3.2.1\Docs\index.html

• BlueNRG-x project source code directory:

  • C:\Users${user name}\ST\ "BlueNRG-LP DK xxx" or "BlueNRG-1_2 DK xxx"

For more information, please refer to lucienkuang's post "BlueNRG series tutorials, documents, training materials and common problems, etc."

https://en.eeworld.com/bbs/thread-1162870-1-1.html

wahaha205

Very good information