LSM6DSL 3D Accelerometer and 3D Gyroscope PCB Package and Code[Copy link]
This post was last edited by littleshrimp on 2019-3-28 22:26 The LSM6DSL iNEMO Inertial Module is a "normally on" system-in-package device that includes a 3D digital accelerometer and a 3D digital gyroscope. Both the accelerometer and gyroscope of the LSM6DSL feature low power consumption. The module consumes 0.4mA in combined normal mode and 0.65mA in combined high performance mode. The LSM6DSM meets mainstream OS requirements and provides real, virtual and batch sensors with a 4k byte dynamic data batch rate. FEATURES Both accelerometer and gyroscope provide an “always on” low power experience Power consumption: 0.4mA in combined normal mode, 0.65mA in combined high performance mode Smart FIFO up to 8k bytes depending on the feature combination Android M compatible Auxiliary SPI for OIS data output for gyroscope and accelerometer Hard and soft iron for external magnetic sensor correction ±2/±4/±8/±16 g full scale ±125/±245/±500/±1000/±2000 dps full scale Analog supply voltage: 1.71V-3.6V SPI and I2C serial interfaces with host processor data synchronization Dedicated gyroscope low-pass filter for UI and OIS applications Smart embedded functions: pedometer, step detector and step counter, significant motion and tilt standard interrupts: free fall, wake-up, 6D/4D Position, click and double clickEmbedded temperature sensorsECOPACK, RoHS and “green” compliantApplications Motion tracking and gesture detectionSensor hubsIndoor navigationIoT and connected devicesSmart energy-efficient handheld devicesEIS and OIS for camera applicationsVibration monitoring and compensationLSM6DSL Datasheet:
lsm6dsl.pdf(1.8 MB, downloads: 28)
提升卡
变色卡
千斤顶
京公网安备 11010802033920号
