Altium Designer 3D View Problem

littleshrimp

Altium Designer 3D View Problem [Copy link]

 

Now switch to 3D view to see the following effect, it seems that there is no green oil and you can see the copper skin directly. Clicking "Clear" in the lower right corner does not work.

littleshrimp

The PCB board frame is not closed, and the board shape generated using the border is not the actual board shape.

qwqwqw2088

Is everything normal when switching to 2D?

littleshrimp

qwqwqw2088 posted on 2020-1-4 15:53 Is everything normal when switching to 2D?

2D is normal

qwqwqw2088

littleshrimp posted on 2020-1-4 16:32 2D Normal

I have never encountered this situation before.

Open View Configuration to see if there are any abnormalities such as unchecked

陈Ymen

Try pressing shift s

littleshrimp

qwqwqw2088 posted on 2020-1-4 17:04 I have never encountered such a situation. Open View Configuration to see if there are any abnormalities such as unchecked items

The problem was found to be caused by an error in the shape of the board

dcexpert

Adding a 3D model to the component will make it much more convenient to look at and easier to find problems.

AD's 3D function is actually not bad, but it provides fewer free libraries. You can download the 3D library in step format from the 3D ContentCentral website, which is very convenient to use.

littleshrimp

dcexpert posted on 2020-1-4 18:25 Adding a 3D model to the component will make it much more convenient and easier to find problems. AD's 3D function is actually not bad, but it provides free...

Thanks

hjl2832

The board frame is not effectively defined.

littleshrimp

hjl2832 posted on 2020-1-8 12:42 The board frame is not effectively defined

Indeed

qwqwqw2088

The board frame is not effectively defined.

Does it mean that it is not defined in the mechanical layer? Or is the shape not closed?

littleshrimp

qwqwqw2088 posted on 2020-1-9 08:41 The board frame is not effectively defined, which means it is not defined in the mechanical layer? Or is the shape not closed?

There is a gap in the frame. I didn't pay attention to the prompt when defining the board shape.