• You can log in to your eeworld account to continue watching:
  • Demand analysis of differential amplifier circuits and static analysis of long-tail differential amplifier circuits
  • Login
  • Duration:7 minutes and 44 seconds
  • Date:2017/05/21
  • Uploader:老白菜
Introduction
The main contents of the course include basic knowledge of semiconductors, basics of amplifier circuits, multi-stage amplifier circuits, integrated operational amplifier circuits, frequency response of amplifier circuits, feedback of amplifier circuits, signal operation and processing, waveform generation and signal conversion, and power amplifier circuits. , DC regulated power supply and image reading of analog electronic circuits, etc. This course enables students to acquire basic knowledge, basic theories and basic skills in analog electronics technology through the analysis and design of commonly used electronic devices, analog circuits and their systems, laying the foundation for in-depth study of electronic technology and its application in professional fields. Base.

Reference textbooks for this course: Hua Chengying, Tong Shibai, "Fundamentals of Analog Electronic Technology", Higher Education Press., 2006
Unfold ↓

You Might Like

Recommended Posts

Show off what I received recently
I have received a lot of stuff from the forum recently. I was not at the company last week, so I didn't go to pick up the express parcels. Today I got them all at once. First, the tool set.You can und
lonerzf Talking
Share interactive Q&A with TI experts | Design and optimization of buck-boost charging chip compatible with USB-PD protocol
[i=s]This post was last edited by qwqwqw2088 on 2020-8-17 11:36[/i]
qwqwqw2088 Analogue and Mixed Signal
Share a PIC simple programmer
I would like to share with you a programmer suitable for amateur production. We regard it as a simple JDM. I successfully made this small device once, and it can program 16F*** series PIC microcontrol
digi01 Microchip MCU
How to implement the io key driver function of 2410
I am using the sbc2410 development board from Friendly Arm, which comes with a button driver for buttons. We have made some changes, and the following program is available. Now when I press a key, inf
lionedwolf Embedded System
About the use of relays
I want to use a relay as a switch to drive the peripheral circuit and use a single-chip microcomputer for control. Now I have a six-pin relay HRS1H-DC12V, but I don't know how to connect it. Please he
真菌拉拖鞋 MCU
Has anyone used TW8811, TW8816?
I've been paying attention to car DVD dot screen processing products recently. A friend recommended TW8811 and TW8816. Has anyone used them? How do you feel about them?
astrive Automotive Electronics

推荐文章

200MW/1600MWh!ESI将在澳大利亚建首个铁基液流电网规模电池制造厂 2024年09月27日
昆士兰州政府已承诺在澳大利亚投资一家工厂,生产基于铁电解质技术的液流电池。昆士兰州副总理和能源部长在联合声明中表示,该州将向该工厂投资 2500 万澳元(1712 万美元),该工厂已由总部位于当地的亚太储能工业公司(ESI)开始建设。此外,一国际投资公司也向ES ......
新能源驱动电机共模电流产生的轴电压是什么? 2024年07月26日
当前400V下的电机轴承并不是都会发生电腐蚀,这主要还是取决具体的设计方案 。但是800V下的系统,电机轴承发生电腐蚀的概率(不增加防护措施)将会直接翻倍。没有侥幸的可能。 针对800V,大家的聚焦点都集中在SIC、耐电晕、高PDIV、PEEK、高速、扁线、油冷等。 考虑到现有轴承电腐蚀的解决方案应用成熟度和成本问题,轴承电腐蚀问题应引起足够的重视 。 本期的内容主要...
什么是共模电压呢?聊聊电机轴承电腐蚀 2024年07月24日
壹 ** 共模电压** 谈到电机轴承电腐蚀,首先要提到的就是共模电压,因为,在逆变器供电的电机系统中,电 机的轴电压和轴承电流的根源在于电机的共模电压 。那么,什么是共模电压呢?百度百科的解释如下 为了更好的理解,我们先来看下现在三相驱动电机PWM变频控制。 逆变器通过上下桥臂的开关管组合开通、关断,使逆变器输出侧输出一系列等幅不等宽的脉冲电压来等效为正弦交流电 。关...
国内自主品牌最大规模电感式传感器工厂投产 2024年06月14日
日前,武汉理岩控制技术有限公司在武汉市光谷投产了国内最大的自主品牌电感式位置传感器生产基地,新工厂建成投产4条专业化传感器自动生产线,可年产450万套电感式位置传感器。武汉理岩于2015年在国内首家开始批量生产电感式位置传感器,2017年大批量供货,新基地投产标志着国内规模最大自主品牌电感式位置传感器生产基地全面建成。 公司于在东湖新技术开发区黄龙山东路6号华测时空智能科...

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号