I want to learn ARM embedded development but I don't know where to start. I have a few questions for beginners: 1. What tools and equipment are needed for ARM development? What is the specific process
1 Test platform: EK-TM4C1294XL, ARM model: TM4C1294NCPDT. 2 Purpose: Set the BOOTCFG register so that when the PA6 pin is high, the ARM will enter the bootloader in the ROM. 3 Test program: Use the bl
[i=s]This post was last edited by jameswangsynnex on 2015-3-3 20:04[/i] 1. If you are doing manual soldering, you should develop good habits. First, before soldering, you should visually inspect the
I wrote the following program to measure the temperature of two 18B20s in series and display them on 12864. But I can't get the result. Only one of the temperatures can be displayed on 12864. I have t