This is a product primarily targeted at automotive applications and can operate in ambient temperatures up to 150 degrees. The MCP8024 can also be used in a variety of motor systems.
The flash I use is spansion, 16-bit 32M. I configure mtd and other options in the 2.6 kernel, and the compilation is successful. But after reloading the system, the error "Kernel panic - not syncing:
The debugging is completed. I took a photo and removed all the flying wires. Haha.Unfortunately, the JTAG part is missing an RTCK. Oh my god, I want to bang my head against the wall.[[i]This post was
[i=s] This post was last edited by CMika on 2015-1-15 01:10[/i] After a few days of tinkering with the board, I was fed up with typing commands in the terminal, which was not high-end and classy at al
[b][size=14px]Mainly based on the following standards:[/size][/b] [size=14px] 1.GBT18487.1-2015 "General requirements for conductive charging systems for electric vehicles"[/size] [size=14px] 2.GBT184