A 12V model aircraft battery is needed to drive 6 7V servos. Each servo requires 1A of current to maintain, not including the stall current.
Do you have any chips to recommend?
I can measure DC voltage, but when measuring AC current, I tried to collect 1000 data points for comparison and output the maximum value, but the result was wrong. Is it because AC current has negativ
The core function of the body control module (BCM) is to monitor input signals such as the high beam switch status and enable or disable power to the corresponding loads such as the high beam. The BCM
Draw a SOT-3 package, the middle pin is a special-shaped pad. According to the method on the Internet, why is the solder mask layer between the pin and the special-shaped pad always displayed? I would
It's like this. After I configured the source code, I ran make to build it, but a problem occurred and I don't know how to solve it. I'm here to ask for help. Since I don't know much about this and I'
In view of the defect that the digital circuit model of Protel99SE is not suitable for pulse circuit simulation, this paper discusses how to create subcircuit models and hierarchical module circuits t