The main considerations for WiFi modules are as follows: 1. Communication interface: USB or SDIO and PCIE; 2. Power supply mode: 3V3 is more commonly used, and 5V power supply is also available; 3. An
orcad16.3. pads9.3. win7 computer. Schematic rule check, normal, export netlist. Pads import netlist, nets must contain more than one pin appears. . . . I found the corresponding network, and it was c
[i=s] This post was last edited by 5525 on 2016-6-28 22:30 [/i] [b][size=5][color=#00ff00]GMSL: Gigabit Multimedia Serial Link[/color][/size][/b] How fast is it? [color=#0000ff][b] It can reach 3.125G
Let me tell you about an incident that happened in my previous job. I was fooled for a whole day. The thing is, the product I made in the company before was a car navigation. When the power was off, t
[i=s] This post was last edited by Feihong Haojie on 2017-8-24 00:13 [/i] I want to make a DDS signal source. I want to use a Butterworth LC low-pass filter to filter the DDS output signal, and then e
The MakeCode extension for the HTS221 temperature and humidity sensor allows you to use the HTS221 in a graphical way. The extension is ported from the MicroPython driver , retaining the oneshot mode