I participated in a forum activity some time ago, but failed to pass TI's review. The forum gave me a small gift - an Omron pedometer. I received it, thanks to the forum:) Let me show it off!!It seems
[i=s]This post was last edited by woshilee on 2014-4-29 11:47[/i] As shown in the figure, we can see how TA0.1 outputs waveforms, but what about the waveform output by TA0.0? When using output mode 4,
I had to deal with the registration issue several times before, but this morning with the help of the administrator, I was finally able to enter the main site. But I encountered a new problem: after c
I have used asynchronous Fifo many times in my current project. The problem is that, in asynchronous mode, I keep writing data to the Fifo and continue writing even when it is full. At the beginning,
I made a board myself, the reset pin of the DDR3 chip on the HPS side is always low, but the DE1 development board does not have any program burned inside, and the pin is high level when powered on. I