This is my Timer configuration. The board is ICE-V2. Once the Timer is used, the program cannot run. I would like to ask the experts to give me some advice on how to use the Timer. It would be best if
I am a novice, and this is my first time to work with an LCD module. I feel a little confused. My MPU is arm7 lpc2114, and the LCD chip is ST7920. I use the I/O port for write operations (I will defin
I will fight anyone who says that ST's I2C can be used! ST's I2C definitely has a bug in the chip design. I use STM32, and my colleague uses STM8 and they all have the same problem: I2C will die at an
I hope someone can help me look at this program. The temperature collected by the two channels is always a fixed value, and the DS18B20 does not work. Thank you in advance:)
The program in the DSPlay example in the SDK that I used in VC has no problem playing video files. The clarity and speed are very good, and it supports RMVB, RM, AVI, and MPEG formats. However, when I
CPU 16-bit high speed, 512K Flash, 256K RAM, 1K EEPROM Ethernet IEEE802.3 10M Serial port 2X TTL level, TXD, RXD, CTS, RTS, DCD, DTR, DSR Serial port rate 300-115.2K bps, 7 or 8 data bits Data format