In MPLAB X IDE, can't a switch statement use a variable after a case? switch(Displacement[5]) { case Displacement[0]: Run_Section = 0; // break in acceleration section; Like above, the error is as fol
It has been ten days since I got the board. I will share it with you today. The development board is equipped with an antenna (the antenna that comes with the board). The Bluetooth signal can be recei
The schematic diagram is as above: A1 connects to the SDA of the 3.3V MCU, and B1 connects to the SDA of the 5V MCU
Sometimes when A1 is at a low level, the S level of NMOS still has 1.5V.
But if R17