There is no empty statement in the standard C language. But in the C language programming of single-chip microcomputer, it is often necessary to use several empty instructions to produce a short delay
I was originally working on updating the program online through the serial port using the bootloader. The serial port in the boot program was initialized with smclk115200 baud rate, and the serial por
I use Uart serial port interrupt mode to receive data on LPC11C14 chip. The FIFO interrupt trigger byte number is set to 4 bytes. I use serial port assistant on PC to send 5 characters of "hello". LPC
The return value of the DEV_STAT register of BQ79606A-Q1 is abnormal. The GPIO is configured as temperature sensing mode, and the data read from each GPIO is very different. Please guide!!!
Share a TMS320C6416 timer + interrupt test program DSP model: TMS320C6416 Software development environment: CCS3.3 Test available [size=4][b][/b][/size]
Millimeter-wave radar sensors are constantly "going viral" and have promising market prospectsHow to monitor basic vital signs such as heartbeat and breathing? For this demand, I believe most people's