Google Pixel 7 early CAD drawings revealed, smaller and thinner than Pixel 6

       Foreign media choosebesttech collaborated with @xleaks7 David to draw the CAD 3D model of Google Pixel 7. Let's take a look at it.

　　As can be seen from the picture above, the overall design of the phone is very similar to its predecessor, the Google Pixel 6, but there are still some changes:

　　1. Size

　　The upcoming new phone will measure 155.6 x 73.1 x 8.7 mm (11.5 with camera bump), which means the new phone will be smaller and thinner than the Pixel 6.

　　2. Rear camera

　　The rear camera on the Pixel 7 looks like it is integrated into the body on both sides, and looks like a whole. The camera module may be the same color as the chassis. But considering that there is a frame around the two lenses on the camera module, the visual effect is still debatable. Other than that, the rear lens module includes two lenses and flash, which is basically the same as the previous generation.

　　3. Millimeter wave 5G antenna

　　As shown in the image above, the upcoming Pixel 7 has a sensor on top that looks very similar to the mmWave 5G antenna on the side of the iPhone 12/13 series.

　　Apart from the above changes, the rest is almost the same as the Pixel 6: punch-hole front camera, beautiful front panel, under-screen fingerprint, speaker grille and USB Type-C, SIM card slot on the left, etc.

　　If Google maintains the same release specifications, we will probably see the next-generation Google Pixel 7 in October 2022, and IT Home will bring you more reports then.