When using a mobile phone, it is always dropped carelessly or accidentally. It is okay if it falls on the edge of the phone, but if the screen is broken, it is heartbreaking. Many people say that they really don’t know much about mobile phone screens, and they can only be at the mercy of others when they go to the repair shop. The mobile phone screen needs to be distinguished between the internal screen and the external screen. Although there is only one word difference, the price difference is very large. Today, the female anchor will talk to you about how to judge whether the broken screen is the external screen or the internal screen after the mobile phone screen is broken.
1. Touch
Generally speaking, the screen of a smartphone is divided into two layers, the inner screen is responsible for display, and the outer screen is responsible for touch. If the phone screen is broken, and some areas of the phone are insensitive or invalid to touch, but the display is fine, it means that the outer screen of the phone is broken.
After the outer screen of a mobile phone is broken, the mobile phone can still be used for a period of time if the screen is not squeezed, but it is still recommended to replace it as soon as possible. Because after the outer screen of the mobile phone is broken, the cracks will extend, and if the front panel glass of the mobile phone is dented, over time, the surface of the inner screen of the mobile phone will also leave scratches, and the inner screen of the mobile phone may also be crushed, so it is recommended to replace the broken outer screen as soon as possible.
2. View the image display
If the phone screen is broken, the image displayed on the phone is not displayed or large blocks of color or water patterns are flickering, but the touch is normal, it means that the inner screen of the phone is broken. If there are still some black, yellow, or white spots on the screen, there is a problem with the inner screen. At this time, we must be careful not to let it expand, and we can replace the screen in advance.
If after the phone screen is broken, some areas of the phone are ineffective or insensitive to touch, and the image display of the phone has large color blocks or no display, then this means that both the inner and outer screens of the phone are broken.
3. Use a flashlight
The outer screen is usually translucent and can transmit light. If you shine a flashlight on the screen and see obvious cracks on the outer surface, it means the outer screen is broken. If you look at it against the light and see that the cracks inside and outside are obviously different, then both the inner and outer screens are cracked.
Well, the above is what the female anchor has summarized for everyone about how to judge whether the broken screen is the inner screen or the outer screen after the mobile phone screen is broken. No matter which screen is broken, it is recommended that you replace it as soon as possible to avoid delaying daily use.
Previous article:Apple's facial recognition does not leak user privacy. It is an algorithmic mechanism.
Next article:DxOMark is about to announce the product that netizens speculate may be ASUS ZenFone 6
- Popular Resources
- Popular amplifiers
- Apple faces class action lawsuit from 40 million UK iCloud users, faces $27.6 billion in claims
- Apple and Samsung reportedly failed to develop ultra-thin high-density batteries, iPhone 17 Air and Galaxy S25 Slim phones became thicker
- Micron will appear at the 2024 CIIE, continue to deepen its presence in the Chinese market and lead sustainable development
- Qorvo: Innovative technologies lead the next generation of mobile industry
- BOE exclusively supplies Nubia and Red Magic flagship new products with a new generation of under-screen display technology, leading the industry into the era of true full-screen
- OPPO and Hong Kong Polytechnic University renew cooperation to upgrade innovation research center and expand new boundaries of AI imaging
- Gurman: Vision Pro will upgrade the chip, Apple is also considering launching glasses connected to the iPhone
- OnePlus 13 officially released: the first flagship of the new decade is "Super Pro in every aspect"
- Goodix Technology helps iQOO 13 create a new flagship experience for e-sports performance
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Motor drive development communication 4: Classification and standards of engineers
- Basic knowledge of digital circuits
- Are you still exercising?
- Is there any book specifically about op amp time domain?
- Why does it prompt me that the download frequency is too high? Please try again later.
- BlueNRG Series Storage Analysis (Flash and RAM)
- How to start power supply design
- When learning high-speed circuit design, you must know these things!
- EEWORLD University Hall----Live Replay: The Use of SOI Level Shift Driver IC in LLC Topology
- June 4 live broadcast review: TI wireless training live broadcast (including video, PPT)