The commonly used insulating materials in servo motors can be divided into A, B, C, H, F and E grades according to their heat resistance:
1A grade insulation: such as cotton yarn, silk, paper and other organic fiber materials that have been impregnated, and magnetic paints used for different enameled wires;
2B grade insulation: such as inorganic materials such as mica, glass fiber and asbestos, which are made of organic paints with improved heat resistance as binders, or their combinations; 3C
grade insulation: including mica, quartz, glass fiber, etc. without binders, asbestos, glass fiber fabrics or other products treated with silicone organic resins and polyimide impregnation paints with particularly excellent stability, polyimide films, etc.
4H grade insulation: such as silicone organic materials and materials such as mica, glass fiber, asbestos, etc., which are made of organic paints as binders;
5F grade insulation: such as materials such as mica, glass fiber, asbestos, etc., which are made of synthetic resin paints modified by organic compounds as binders, or their combinations;
6E grade insulation: such as films made of polyester resin, epoxy resin, triacetate fiber, etc., polyester paint on high-strength enameled wire;
Previous article：Introduction to motor closed-loop control feedback methods
Next article：Application of Jintian inverter in wire drawing machine
- Popular Resources
- Popular amplifiers
TLC279MJB
- Detailed explanation of intelligent car body perception systemThis article mainly introduces the vehicle body perception and positioning system. The vehicle body perception mainly perceives the vehicle position, driving speed, attitude and other information. The following introduces inertial navigation, satellite navigation system and ...
- How to solve the problem that the servo drive is not enabledThe problem of the servo drive not being enabled may cause the entire automation system to not work properly. In order to solve this problem, we need to analyze and troubleshoot from multiple aspects. ...
- Why does the servo drive not power on?Servo drives are an indispensable key component in the field of modern industrial automation. They can accurately control the speed, position and torque of the motor and are widely used in robots, CNC machine tools, packaging machinery, textile machinery, etc. ...
- What point should I connect to when the servo is turned on?The servo motor is a high-precision, high-response motor that is widely used in automation equipment, robots, CNC machine tools, and other fields. In the control of the servo motor, the enable signal (Enable Signal ...
- How to turn on the internal enable of Panasonic servo drive?Panasonic servo drive is a high-performance motor control device, widely used in industrial automation, robotics, CNC machine tools and other fields. In practical applications, in order to ensure the safe and stable operation of the system ...
- What is the rigidity setting of Panasonic servo drive?
- How to change the inertia ratio of Panasonic servo drive
- What is the inertia ratio of the servo motor?
- Is it better for the motor to have a large or small moment of inertia?
Professor at Beihang University, dedicated to promoting microcontrollers and embedded systems for over 20 years.
- LED chemical incompatibility test to see which chemicals LEDs can be used with
- Application of ARM9 hardware coprocessor on WinCE embedded motherboard
- What are the key points for selecting rotor flowmeter?
- LM317 high power charger circuit
- A brief analysis of Embest's application and development of embedded medical devices
- Single-phase RC protection circuit
- stm32 PVD programmable voltage monitor
- Introduction and measurement of edge trigger and level trigger of 51 single chip microcomputer
- Improved design of Linux system software shell protection technology
- What to do if the ABB robot protection device stops
- Detailed explanation of intelligent car body perception system
- How to solve the problem that the servo drive is not enabled
- Why does the servo drive not power on?
- What point should I connect to when the servo is turned on?
- How to turn on the internal enable of Panasonic servo drive?
- What is the rigidity setting of Panasonic servo drive?
- How to change the inertia ratio of Panasonic servo drive
- What is the inertia ratio of the servo motor?
- Is it better for the motor to have a large or small moment of inertia?
- What is the difference between low inertia and high inertia of servo motors?
- How to select ultra-low power MCU
- Wireless receiving decoding program based on STM32 and hs1527, ev1527, rt1527, fp1527
- [Qinheng RISC-V core CH582] ADC internal temperature conversion
- Predictive Control Algorithm Program
- GigaDevice GD32450I-EVAL is available for free evaluation and trial. It has rich onboard functions and covers multiple fields. Are you interested?
- Worth reading: [Homemade FOC Driver] A simple explanation of FOC algorithm and SVPWM technology
- I am looking for an adjustable negative voltage chip. The negative voltage end of -0.5V to -5V used for OP37 must be adjustable.
- PCI Bus Standard Protocol (Chinese Version)
- [Fudan Micro FM33LC046N Review] + GPTIM breathing light
- [Evaluation of domestic FPGA Gaoyun GW1N series development board]——(4) Serial port experiment
京公网安备 11010802033920号