Microchip Technology PIC32CZ CA MCUs Now Available at Mouser for Industrial and Automotive Security

Publisher:EE小广播Latest update time:2024-05-07 Source: EEWORLDKeywords:Mouser Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere

May 7, 2024 – Mouser Electronics, an authorized global semiconductor and electronic component distributor focused on introducing new products, is now stocking Microchip Technology's PIC32CZ CA MCU. The PIC32CZ CA is a 32-bit high-performance MCU with multiple connectivity options, making it ideal for industrial gateway, graphics or automotive applications.


image.png


Microchip Technology PIC32CZ CA MCUs feature an Arm® Cortex®-M7 processor, 8MB Flash and 1MB SRAM, and a wide range of connectivity options including High-Speed ​​USB, CAN FD, SQI, SDHC, I2S™, Media LB™ bus, EBI and SERCOM. The PIC32CZ CA90 MCU also includes an integrated Hardware Security Module (HSM) to provide a unified security solution for industrial and consumer applications. The HSM operates as a security subsystem with an independent MCU built in to manage firmware and security functions such as hardware secure boot, key storage, cryptographic acceleration, etc. The HSM creates a firewall security subsystem independent of the host MCU, separating all security functions from the host MCU.


PIC32CZ CA MCUs also support secure boot capabilities to verify the authenticity and integrity of application code to prevent malicious tampering. In addition, the PIC32CZ CA90's cryptographic hardware is used to verify the signature of the application code and its hash. This multi-layered security approach ensures that the device only executes verified and untampered code, helping to prevent unauthorized access or tampering.


PIC32CZ CA MCUs can be configured with a variety of connectivity options, including USART/UART, I2C, SPI, CAN FD, High-Speed ​​USB and Gigabit Ethernet. Ethernet connectivity options include Audio Video Bridging (AVB) and Precision Time Protocol (PTP) based on the IEEE 1588 standard. Available in 100/144/176/208-pin TQFP and BGA packages, these MCUs can be expanded with 2MB, 4MB or 8MB of onboard flash, 1MB SRAM and error correction code (ECC) memory to reduce data corruption.


The PIC32CZ CA80 and PIC32CZ CA90 are supported by the EV51S73A and EV16W43A Curiosity Ultra development boards, also available from Mouser. These boards provide a complete evaluation and prototyping platform for the PIC32CZ CA MCUs. The Curiosity Ultra development board features an embedded programmer/debugger and is supported by the MPLAB Integrated Development Environment and MPLAB Harmony. Connectors make it easy to connect to an Arduino Uno R3, MikroElektronika Click board, or Xplained Pro expansion board to develop Bluetooth audio, IoT, robotics, and other proof-of-concept designs.


As an authorized global distributor, Mouser Electronics stocks a wide range of semiconductors and electronic components Ready to Ship™. Mouser aims to provide customers with fully certified original products and provide full manufacturer traceability. To help customers accelerate their designs, Mouser's website provides a rich technical resource library, including a technical resource center, product data sheets, supplier-specific reference designs, application notes, technical design information, design tools, and other useful information.


Engineers can also subscribe to the free Mouser newsletter with one click to keep up to date with new product trends and information in the industry. When subscribing to Mouser's newsletter, we can provide relevant news reports and reference information based on your changing specific project needs. Mouser fully respects the rights of users and gives you the freedom to control the content you want to receive.



Keywords:Mouser Reference address:Microchip Technology PIC32CZ CA MCUs Now Available at Mouser for Industrial and Automotive Security

Previous article:Microchip Launches PIC32CK 32-bit MCU with Hardware Security Module to Easily Implement Embedded Security Functions
Next article:Microchip Expands Radiation-Tolerant MCU Product Line with the Launch of the SAMD21RT 32-bit MCU Based on Arm® Cortex®-M0+

Recommended ReadingLatest update time:2024-11-16 09:27

What is used to implement the timing function of the microcontroller? What are the ways?
There are several ways to implement the 2-hour delay function in STM32: 1. Use the delay function You can use the delay function provided by STM32 to implement the delay function. The delay function calculates the delay time based on the CPU clock frequency and delay time. During the delay period, the CPU is in a busy
[Microcontroller]
[51 microcontroller] STC89C52 lights up the LED light, including C code (2)
1. Reference tutorial: Qingxiang 51 microcontroller tutorial 2. Basic principles: By controlling the high and low electric frequency of the right output terminal, the light can be turned on and off. The voltage on the left side of the lamp is 5V, and if the right side is given logic 0 (0V), there is a voltage differen
[Microcontroller]
[51 microcontroller] STC89C52 lights up the LED light, including C code (2)
PIC microcontroller AD framework
/******************************** *1 ADCON1 selects reference voltage and analog input pin * ADCON0 selects channel, clock turns on AD mode *2 Clear ADIF Set ADIE PEIE GIE *3 Wait for a certain period of time *4 Start A/D conversion GO/DONE=1 *5 1 Scan mode starts scanning GO/DONE and clears    2 respond to interrupt
[Microcontroller]
A6_A7 GPS module 51 single chip microcomputer routine
1. Prepare a STC89C52 minimum system board      2. Burn the code (burn the code first and then connect the wires to prevent the code from being unable to be downloaded after connecting the wires) 3. Power the module and turn on the module 4. Connect:     STC89C52 A6&A7     GND - GND     TXD/P3.1- U_RXD     RXD/P3.0- U
[Microcontroller]
8051 MCU serial port baud rate calculation method
The STC12C5A60S2 microcontroller is compatible with the 80C51 microcontroller. Its serial port baud rate can be generated by a timer or an independent baud rate generator. Its baud rate mode can be fixed or variable. Fixed baud rate: When the communication speed setting bit UART_M0x6/AUXR.5 of mode 0 = 0, its baud r
[Microcontroller]
1602+ADC0832 smoke alarm system based on 51 single chip microcomputer
This design is based on 51 single-chip microcomputer, with ADC0832 digital-to-analog conversion module, 1602 LCD display module, key control and sound and light alarm module! It can realize real-time monitoring and response of smoke concentration. The following is the simulation directory   . Below is part of the co
[Microcontroller]
1602+ADC0832 smoke alarm system based on 51 single chip microcomputer
Mouser wins Vishay Distributor of the Year Award
July 22, 2021 – Mouser Electronics, an authorized global distributor focused on new product introductions (NPIs), announced that it has received the 2020 Americas Passive Electronic Components Premium Service Distributor Award from Vishay Intertechnology, Inc., a renowned manufacturer of discrete semiconductors and pa
[Internet of Things]
Mouser wins Vishay Distributor of the Year Award
STM32F103C8T6 microcontroller reads and writes 24C02 memory through I2C library functions
Circuit connection: SCL and SDA are connected to PB6 and PB7 respectively, and both are connected with external 10kΩ pull-up resistors. The circuit board is shown below: The 4 pin headers on the far left are connected to the power supply and serial port. Since there is no external crystal oscillator on the board,
[Microcontroller]
Latest Microcontroller Articles
  • Download from the Internet--ARM Getting Started Notes
    A brief introduction: From today on, the ARM notebook of the rookie is open, and it can be regarded as a place to store these notes. Why publish it? Maybe you are interested in it. In fact, the reason for these notes is ...
  • Learn ARM development(22)
    Turning off and on interrupts Interrupts are an efficient dialogue mechanism, but sometimes you don't want to interrupt the program while it is running. For example, when you are printing something, the program suddenly interrupts and another ...
  • Learn ARM development(21)
    First, declare the task pointer, because it will be used later. Task pointer volatile TASK_TCB* volatile g_pCurrentTask = NULL;volatile TASK_TCB* vol ...
  • Learn ARM development(20)
    With the previous Tick interrupt, the basic task switching conditions are ready. However, this "easterly" is also difficult to understand. Only through continuous practice can we understand it. ...
  • Learn ARM development(19)
    After many days of hard work, I finally got the interrupt working. But in order to allow RTOS to use timer interrupts, what kind of interrupts can be implemented in S3C44B0? There are two methods in S3C44B0. ...
  • Learn ARM development(14)
  • Learn ARM development(15)
  • Learn ARM development(16)
  • Learn ARM development(17)
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号