STM8 has a maximum of 32 interrupt systems. In addition, there is a special interrupt in the external interrupt called TLI non-maskable interrupt, that is, PD7. It does not belong to the D interrupt vector but has its own TLI interrupt vector.
A, B, C, D, E, only one of these ports can be used as an interrupt input at the same time, for example, PA0, PB0, PC0, PE0, etc., only one can be used as an interrupt input at the same time.
Procedure for using external interrupts
1. Configure interrupt vector
2. Configure the trigger mode of the interrupt port
Previous article:STM8L USART serial port debugging
Next article:STM8 tim1 ch1 PWM output
- Popular Resources
- Popular amplifiers
Professor at Beihang University, dedicated to promoting microcontrollers and embedded systems for over 20 years.
- LED chemical incompatibility test to see which chemicals LEDs can be used with
- Application of ARM9 hardware coprocessor on WinCE embedded motherboard
- What are the key points for selecting rotor flowmeter?
- LM317 high power charger circuit
- A brief analysis of Embest's application and development of embedded medical devices
- Single-phase RC protection circuit
- stm32 PVD programmable voltage monitor
- Introduction and measurement of edge trigger and level trigger of 51 single chip microcomputer
- Improved design of Linux system software shell protection technology
- What to do if the ABB robot protection device stops
- Keysight Technologies Helps Samsung Electronics Successfully Validate FiRa® 2.0 Safe Distance Measurement Test Case
- Innovation is not limited to Meizhi, Welling will appear at the 2024 China Home Appliance Technology Conference
- Innovation is not limited to Meizhi, Welling will appear at the 2024 China Home Appliance Technology Conference
- Huawei's Strategic Department Director Gai Gang: The cumulative installed base of open source Euler operating system exceeds 10 million sets
- Download from the Internet--ARM Getting Started Notes
- Learn ARM development(22)
- Learn ARM development(21)
- Learn ARM development(20)
- Learn ARM development(19)
- Learn ARM development(14)
- Application of Real-time Spectrum Analyzer in Radio Frequency Microwave Interference Analysis
- Toshiba's new stepper motor driver chip TB5128
- Keysight spectrum analyzer measurement abnormality maintenance--N9010A maintenance
- BQ4050 cannot be unlocked using BQStudio
- [New Year's flavor competition] + Zongzi brown sugar with fish every year, Guizhou's strong special New Year flavor
- The difference between brushed motor and brushless motor
- Share a copy of the altium library file for zynq7000
- Live: Fluke experts talk about Fluke vibration monitoring solutions and product lines
- 【STM32WB55 Evaluation】_06_Temperature and humidity data upload experiment
- The May Day holiday is coming soon. How are you guys planning your holiday?