Single chip microcomputer--flowing light production

Publisher:幸福的家园Latest update time:2016-01-19 Source: eefocus Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere
Task requirements: Use the microcontroller P1 port to control 8 light-emitting diodes to light up in a cycle
 Component name  parameter    quantity
 MCU Minimum System    1
 DC power supply  5V  1
 led    8
 resistance  1kΩ  8

Circuit Schematic

Power module: Use 4 No. 5 batteries in series to provide 6V DC power, which is converted into 5V DC power through the LM2940 power chip.

8 LEDs, made into a small board for easy use, using common anode connection


Program source code

//Program: ex3_7.c
//Function: A flow light control program implemented using a loop structure
#include    //Includes header file REG51.H
void delay(unsigned char i);   //Delay function declaration
void main()    //Main function
{
  unsigned char i,w;
  while(1) {
    w=0x01;     //The initial value of the signal light display word is 01H
    for(i=0;i<8;i++)
    {
      P1=~w;    //After the display word is inverted, send it to port P1
      delay(200);   //Delay
       w<<=1;    //The display word is shifted left by one position         
    }
           }
}
//Function name: delay
//Function function: Implement software delay
//Formal parameter: unsigned char i;
//          i controls the number of outer loops of the empty loop, a total of i*255 loops
//Return value: None
void  delay(unsigned char i)  //Delay function, unsigned character type variable i is the formal parameter
{
   unsigned char j,k;   //Define unsigned character variables j and k
   for(k=0;k //Double for loop statement to implement software delay
     for(j=0;j<255;j++);
}
 

Reference address:Single chip microcomputer--flowing light production

Previous article:MCU and DAC0832 collect data
Next article:Introduction to 51 MCU - Serial Port, SCON

Latest Microcontroller Articles
  • Download from the Internet--ARM Getting Started Notes
    A brief introduction: From today on, the ARM notebook of the rookie is open, and it can be regarded as a place to store these notes. Why publish it? Maybe you are interested in it. In fact, the reason for these notes is ...
  • Learn ARM development(22)
    Turning off and on interrupts Interrupts are an efficient dialogue mechanism, but sometimes you don't want to interrupt the program while it is running. For example, when you are printing something, the program suddenly interrupts and another ...
  • Learn ARM development(21)
    First, declare the task pointer, because it will be used later. Task pointer volatile TASK_TCB* volatile g_pCurrentTask = NULL;volatile TASK_TCB* vol ...
  • Learn ARM development(20)
    With the previous Tick interrupt, the basic task switching conditions are ready. However, this "easterly" is also difficult to understand. Only through continuous practice can we understand it. ...
  • Learn ARM development(19)
    After many days of hard work, I finally got the interrupt working. But in order to allow RTOS to use timer interrupts, what kind of interrupts can be implemented in S3C44B0? There are two methods in S3C44B0. ...
  • Learn ARM development(14)
  • Learn ARM development(15)
  • Learn ARM development(16)
  • Learn ARM development(17)
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号