Application of PLC in shuttle section traverse system of warp knitting machineApplication of shuttle section traverse system of warp knitting machine

Introduction: In recent years, the market demand for warp knitting machines has increased, and the sales of double-needle bed warp knitting machines, high-speed machines, biaxial and multi-axial warp knitting machines are all good. In response to the system control requirements of warp knitting machines, Beijing Hollysys Automation Drive Technology Co., Ltd. has launched a warp knitting machine shuttle section traverse system. The whole system uses Hollysys PLC with high cost performance as the controller, and uses the PLC servo positioning function, rich internal data resources and powerful communication function to closely combine control and drive, making the system control better, showing the advantages of Hollysys products in system integration.

The warp knitting machine is mainly composed of a weaving mechanism, a bar slewing mechanism, a warp letting mechanism, a pulling and winding mechanism, and a transmission mechanism. The control system of the warp knitting machine mainly includes three parts: an electronic warp letting system, an electronic jacquard system, and a shuttle slewing system. The main function of the electronic warp letting system is to control the warp letting speed and tension of various yarns to ensure constant warp letting. The electronic warp letting system can be divided into two types: single-speed or double-speed EBA and multi-speed EBC. It uses PLC, frequency converter, three-phase asynchronous motor, servo motor, encoder, etc. to form a closed-loop control to achieve constant speed operation of the main shaft and adjust the warp shaft speed, thereby achieving constant warp letting. The electronic jacquard system is mainly used for pattern extraction, and then cooperates with the slewing of the shuttle to achieve pattern forming. It is mainly composed of an embedded system to realize the conversion of jacquard data and the action control of jacquard, and the execution action is realized by 3146 to 4096 solenoid valves. Due to the slow response speed of electromagnetic action, it is now slowly replaced by piezoelectric ceramics with fast action response. The shuttle slewing system mainly controls the movement of the shuttle. The shuttles of warp knitting machines usually have 56 or 40 shuttles, and the maximum number is 56. Each shuttle is controlled by a 900W servo. Due to the large number of control axes, decentralized control is adopted.

The shuttle traverse system developed by Hollysys is composed of PLC and servo motor, including control part, drive part and monitoring part.

The main controller of the control part needs to collect and process the lateral movement signal and coordinate the synchronous work of each sub-controller. The system adopts the G5 series PLC of Hollysys, which consists of a CPU module FM215-2BT02, two 16-point switch input modules FM221-1BH00, three 16-point switch output modules FM222-1BH00 and a 16-point relay output module FM221-1HF00. There are 28 sub-controllers in the system, and each group of sub-controllers controls two-axis shuttle servos. The sub-controller adopts the G3 series high-speed motion control CPU module LM3106A of Hollysys. The CPU module integrates 14-point input and 10-point transistor output, has an RS232 serial communication interface, and has two 100KHz high-speed pulse output functions. The sub-controller is connected to the host computer through the RS232/RS485 converter in 485 communication mode for monitoring.

The system has a total of 56 shuttles, which are controlled by 56 sets of 900W Senchuang AC servos from Hollysys. The servos operate according to the pattern data stored in the sub-controller that has been converted in advance by the weaving conversion program.

The upper monitoring is completed by an Advantech touch-screen tablet computer TPC-1261 equipped with monitoring software; at the same time, the computer also runs a weaving pattern conversion program to convert and download pattern data. The monitoring software uses Hollysys's configuration software to complete the operation status monitoring of the entire system, including the operation status of the servo, the communication status of the PLC and servo, the shuttle number of the pattern operation, etc.; complete the system parameter setting: mechanical parameters are mainly spindle parameters, and motion parameters are mainly pulse frequency, filter time, acceleration and deceleration time, etc. for PLC positioning control; in addition, it completes the process needle installation, fault handling, head control, user management, help and other functions.