Do you remember the 3D image manipulation interface in the movie "Minority Report" where the protagonist Tom Cruise put on gloves and used various hand gestures to zoom, move and rotate the photos, data and images on the 3D screen? I believe that the audience who have watched this movie must have been deeply impressed by the movie scenes after seeing such a novel operation method, and they are bound to express their admiration for the application of this cutting-edge technology.
In the past, such technological scenes could only be seen in science fiction movies to satisfy people's fantasy of future technology; however, with today's technology, the use of new Multi-Touch touch screen technology to introduce it into future computers, mobile phones and other technological products is no longer limited to science and technology movies. For a long time, people have been accustomed to using only a mouse to control computer screens, making it impossible for Multi-Touch multi-point touch screen technology to be fully used in technological products. From the user's perspective, using fingers to operate directly on the screen is theoretically much more accurate than using a mouse. Although this will make the user spend more movement and physical strength, it can bring more fun in the process of control. In addition, there are currently many 3D images or image processing software interfaces that are too complicated to design during the control process. They must be used with a mouse and keyboard, and even many operating methods rely on intuition and experience to obtain the best control method. Therefore, if Multi-Touch multi-point touch interface technology is used to replace the currently used keyboard (buttons) and mouse, it will further reflect the future trend of humanized control interfaces.
▲Caption: In the past, the design of Multi-Touch systems could only sense one contact point, which limited their application. Therefore, some people improved Multi-Touch technology to sense multiple contact points at the same time, making the application scope of Multi-Touch technology more comprehensive. (Source: New York University)
According to overseas media reports, Jefferson Han and his research team at New York University have successfully developed Multi-Touch technology for controlling touch screens by gestures, dynamics, or touch. Although the multi-touch screen technology under research has not yet reached the level of holographic projection in movies, if it is only analyzed from the perspective of human control interface, Multi-Touch multi-touch system can still present amazing research technology. Its innovative application is very simple to use, and does not even require difficult learning skills. It will definitely be the main trend of future application software control interface.
Basically, the multi-touch system is just a touch-control method using multiple fingers, just like playing a musical instrument or other two-handed operations; in addition, this system technology can also allow multiple users to communicate with each other at the same time, for example, an interactive TV wall, or directly controlling the computer. The use of this sensory technology is strictly a "sensory-driven" technology, and it can also provide high resolution and use both hands to operate in complex multi-point windows.
▲Picture: APPLE IPHONE pioneered the introduction of Multi-touch multi-touch input interface technology, and has a built-in gravity sensor, and once the phone is close to the face, it will automatically turn off the infrared distance sensing technology of touch. (Source: APPLE)
In addition, Jefferson of New York University also uses frustrated total internal reflection technology (FTIR). On a 36″x27″ screen, the picture is rear projected, and four fingers and multiple fingers are used to interact with the interface at the same time. What is FTIR? It mainly uses LED light to shine on the inner surface of the plastic to produce light refraction, and the angle of the light needs to be specially designed. For example, if the surface of the plastic is air, the light will be completely reflected, but if there is a material with a higher refractive index (such as skin, fingers), when the glass surface is pressed, the light at the contact point will cause scattered light, and the suppressed internal total reflection technology can be achieved, so that complex geometric manipulation can be performed directly on the screen. (Reference data: NY University, J Han)
▲Caption: Multi Touch multi-touch technology is not as simple as clicking, writing, and pressing; on the other hand, it can also be controlled by pressing with a single finger, or by using two fingers to expand and close the screen in order to achieve the purpose of zooming in and out of the image. As long as you use both hands well, you can control it as you like. (
Previous article:Electronic nose lung cancer early diagnosis system based on neural network
Next article:Research and Improvement of Task Delay in μC/OS-II Real-time Operating System
- Popular Resources
- Popular amplifiers
- Molex leverages SAP solutions to drive smart supply chain collaboration
- Pickering Launches New Future-Proof PXIe Single-Slot Controller for High-Performance Test and Measurement Applications
- CGD and Qorvo to jointly revolutionize motor control solutions
- Advanced gameplay, Harting takes your PCB board connection to a new level!
- Nidec Intelligent Motion is the first to launch an electric clutch ECU for two-wheeled vehicles
- Bosch and Tsinghua University renew cooperation agreement on artificial intelligence research to jointly promote the development of artificial intelligence in the industrial field
- GigaDevice unveils new MCU products, deeply unlocking industrial application scenarios with diversified products and solutions
- Advantech: Investing in Edge AI Innovation to Drive an Intelligent Future
- CGD and QORVO will revolutionize motor control solutions
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- Rambus Launches Industry's First HBM 4 Controller IP: What Are the Technical Details Behind It?
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- Can you please help me analyze the principle of this circuit? Thank you.
- TI Solar Cell Charging Maximum Power Point Tracking Algorithm Reference Design
- [GD32L233C-START Review] 4. Serial port variable length data reception
- 【AD21】How to modify the shell display of PCB 3D packaging
- The weekly review information is here~~
- What is the difference between adding a conjugate inductor and a capacitor behind the rectifier bridge?
- MSP430 MCU Example 5-16 Pattern Light Control
- EEWORLD University Hall----Live Replay: ON Semiconductor's advanced packaging and driver technologies help silicon carbide energy applications
- EEWORLD University Hall----Robotics Visual Control Matlab Simulation
- Open source a graphical building block programming controller board PCB and host computer source code