"How large an area of ​​LED display can be controlled by iPad with the SmartPad Experience Edition S1?"

Many users already know that the Zhipai system produced by Kexin Optoelectronics has four models of products, namely the trial version S1, the standard version S2, the enhanced version S3, and the flagship version S4; in fact, there are other customized models of products, which I will not introduce in detail here.

For users who are new to the Zhipai system, besides the product functions, most of them are more concerned about how large the display area can be controlled by the IPAD? Here we will use the most widely used large-screen product on the market: LED display screen as an example to give you a brief introduction.

From the product parameters of Zhipai S1 model, we can see that the maximum resolution of the motherboard VGA/HDMI video signal output is: 1920 dots x 1080 dots. Now let's calculate the commonly used P2.5\P3\P4 models of LED display screens, and how much screen area can be controlled by iPad wireless control.

PH2.5 Model

(1920 dots X2.5 mm) X (1080 dots X2.5 mm) = 12.960 m2

PH3 Model

(1920 dots X3mm) X (1080 dots X3mm) = 18.662㎡

PH4 Model

(1920 dots X4 mm) X (1080 dots X4 mm) = 33.178 m2

The above are the screen area sizes that can be controlled by the ipad S1 (ipadled.com) product for these three types of LED display screens. The calculation method is actually very simple. As long as it is within the corresponding model and size, it can be wirelessly controlled by the ipad S1. The same applies to other types of LED display screens. Just apply the above calculation formula.