Friends who have visited home appliance stores must have seen more and more LED LCD TVs in the black appliance counters. Some friends may ask, hasn’t liquid crystal been called LCD all along, then what is LED? Today I will explain to you the definition of LED and the advantages of LED LCD TVs. I hope it will be of some help to you in purchasing new machines.
In principle, the current LCD TV is a bit like those advertising light boxes on the street. The light source behind it is diffused and evenly illuminates the transparent film with the picture drawn on it, thus transmitting a bright picture. The LCD panel is like that layer of film, but the picture in it will change.
Traditional LCD devices all use CCFLs (cold cathode fluorescent lamps) as light sources. Although the name is very professional, we understand it as the fluorescent lamps used at home, but the lamp tubes are very thin. The colors of many objects under fluorescent lamps are very strange because the light it emits is not real daylight. The daylight we have long been accustomed to is composed of red, orange, yellow, green, cyan, blue, and purple in a certain proportion. But the light of fluorescent lamps overemphasizes some colors and lacks some colors.
So the problem arises: the color of the light source of the light box behind is not accurate enough, and the image produced after passing through the LCD panel naturally cannot overcome the inherent deficiency, resulting in color reproduction deviation. This is also one of the reasons why LCD monitors have always been difficult to satisfy professional users in terms of image display.
LED is an advanced LCD solution that replaces the traditional LCD backlight module with LED.
Advantages of LED backlight technology:
High brightness, and can achieve stable brightness and color performance within the life span.
Wider color gamut (exceeding NTSC and EBU color gamut) for more vivid colors.
Adjustable backlight white balance while maintaining overall contrast. When the user's video source switches between a computer and a DVD player, the white balance can be easily adjusted between 9600K and 6500K without sacrificing brightness and contrast.
Real-time color management. Since red, green and blue light up independently, it is easy to precisely control the current display color characteristics.
It can provide continuous array light source for large-size screens.
Reduce the artifacts of dynamic scenes without sacrificing brightness and life. Because the flickering frequency of traditional CCFL lamps is low, dynamic scenes may cause screen jumps. LED backlight can flexibly adjust the light frequency, and the frequency is much higher than CCFL, so it can perfectly present motion pictures.
The brightness adjustment range is large. It is easy to achieve LED power control, unlike CCFL, which has a threshold for the minimum brightness. Therefore, whether in bright outdoors or in a dark room, users can easily adjust the brightness of the display device to the most pleasing state.
Wide operating temperature range, low voltage, impact resistance. Because of the use of solid-state light-emitting devices, LED backlight has no delicate parts and has strong adaptability to the environment.
Low electromagnetic radiation. LED light sources do not generate any radiation, nor do they contain toxic substances such as mercury, and can be described as green and environmentally friendly light sources.
To sum up, LED LCD TVs have the advantages of energy saving, environmental protection, and more realistic colors, and will definitely become the development direction of LCD TVs.
Previous article:General performance requirements of LED drivers
Next article:Detailed Analysis of Solar LED Lighting Principles and Technologies
- Popular Resources
- Popular amplifiers
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
- LED chemical incompatibility test to see which chemicals LEDs can be used with
- Application of ARM9 hardware coprocessor on WinCE embedded motherboard
- What are the key points for selecting rotor flowmeter?
- LM317 high power charger circuit
- A brief analysis of Embest's application and development of embedded medical devices
- Single-phase RC protection circuit
- stm32 PVD programmable voltage monitor
- Introduction and measurement of edge trigger and level trigger of 51 single chip microcomputer
- Improved design of Linux system software shell protection technology
- What to do if the ABB robot protection device stops
- Huawei's Strategic Department Director Gai Gang: The cumulative installed base of open source Euler operating system exceeds 10 million sets
- Download from the Internet--ARM Getting Started Notes
- Learn ARM development(22)
- Learn ARM development(21)
- Learn ARM development(20)
- Learn ARM development(19)
- Learn ARM development(14)
- Learn ARM development(15)
- Analysis of the application of several common contact parts in high-voltage connectors of new energy vehicles
- Wiring harness durability test and contact voltage drop test method
- How to improve the hardware delivery cycle
- 【Evaluation of EVAL-M3-TS6-665PN development board】——by landeng1986
- [GD32E231 DIY Contest] (I): Development Environment Construction + TIMER5
- How to use the USB port as an external circuit to power other devices
- Detailed explanation of the three major weapons to eliminate EMC: capacitors/inductors/magnetic beads
- USB Association published the standard book - about USB TYPE C
- Embedded operating systems I have come into contact with - time-slice-based embedded systems, RTX, FREERTOS, RT-THREAD
- How much do you know about RF semiconductor technology in the wireless era?
- How to design the vias on the heat sink? The problem is not solved, please help me
- Design and simulation of 4PSK modulator based on VHDL.pdf