Precautions for operating LED electronic display screen

At present, with the continuous increase of LED display industry in China, LED large-screen displays are gradually increasing in the streets and alleys of major cities, people's consumption level is also increasing, LED lighting has gradually been used in the daily life of families, LED electronic display screens not only enhance the image of the city, LED also enriches people's cultural life, in this respect, it can be seen that the development speed of LED industry is so fast. While we enjoy the economic benefits brought by LED electronic screens, some businesses with LED electronic display screens do not fully understand the operation and use precautions of LED electronic screens, which shortens the life of LED electronic display screens. Here, senior professionals of Aiswei Company explain to us the operation and use precautions of LED electronic display screens to ensure the safe and normal operation of LED display screen system!

1. Notes on switching LED electronic display screen:

1 Switching sequence:

When opening the screen: turn on the machine first, then open the screen.

When turning off the screen: turn off the screen first, then turn off the phone

(If you turn off the computer first but not the display, it will cause bright spots on the screen and burn out the LED tube, which will have serious consequences.)

2. The interval between turning the screen on and off should be greater than 5 minutes.

3. The computer can only be turned on and powered on after entering the engineering control software.

4. Avoid turning on the screen when it is in full white state, because the system's inrush current is the largest at this time.

5. Avoid opening the screen in an out-of-control state, because the system's inrush current is the largest at this time.

AThe computer does not have access to control software and other programs;

B The computer is not powered on;

C The control section power is not turned on.

6. When the ambient temperature is too high or the heat dissipation conditions are poor, be careful not to keep the LED lighting on for a long time.

7. When a line appears very bright on a part of the electronic display, you should pay attention to turn off the screen in time. It is not advisable to keep the screen on for a long time in this state.

8. If the power switch of the display screen trips frequently, check the screen or replace the power switch in time.

9. Check the firmness of the hanging parts regularly. If there is any looseness, make timely adjustments, re-reinforce or replace the hanging parts.

10. According to the environment of the large screen display screen and the control part, avoid insect bites and place rat repellent if necessary.

II. Notes on changes and modifications to the control section

1. The neutral and live wires of the computer and control parts cannot be connected in reverse and should be plugged in strictly according to the original position. If there are peripherals, after the connection is completed, the case should be tested to see if it is energized.

2. When moving computers and other control equipment, check whether the connecting wires and control panels are loose before powering on.

3. The position and length of the communication line and flat connecting line cannot be changed at will.

4. If any abnormality such as short circuit, tripping, wire burning, or smoking is found after moving, the power should not be turned on and off repeatedly for testing, but the problem should be found in time.

3. Precautions for using the software

1 Software backup: WIN2003, WINXP, applications, software installation programs, databases, etc. It is recommended to use the "one-key restore" software for easy operation.

2. Be proficient in installation methods, original data recovery and backup.

3. Master the setting of control parameters and modification of basic data presets

4. Proficient in using programs, operations and editing.

5 Check regularly* and delete irrelevant data

6. Non-professional personnel are not allowed to operate the software system.