Design Strategies for Efficient Power Systems in Portable Electronic Devices

For battery-powered portable devices, in addition to breaking through the limitations of processing power, the performance of portable system power supplies also needs to be continuously improved. This article discusses the considerations for portable embedded system power design and the principles that should be followed in the design. These principles are helpful for any portable embedded system power design that has powerful functions and must be powered by batteries. Based on the building blocks described in this article, readers can choose the appropriate devices and design strategies for specific designs.

Power Management Unit

Specifying the specific functional and architectural blocks for the power circuit is not trivial and directly affects the operating time of the battery-powered system. The power system architecture varies depending on the embedded product and application area. The figure below shows the power solution in a typical portable embedded system.

Below we define the requirements for each component in the figure. Assume that the product is powered by a battery pack or an external power supply. The function of the power path controller is to switch to the appropriate power source when multiple power sources are available. In some designs, it may be necessary to consider power supply methods including emerging USB and Ethernet Power (PoE).

The battery protection circuit protects the battery from damage due to overvoltage, undervoltage, overheating, overcurrent and other abnormal conditions; the dedicated battery charging circuit should charge the battery once other power sources are available; the fuel gauge circuit continuously monitors the battery charge status and provides battery status information to the user and power management software.

The system may require multiple DS-DC power converters, such as switch mode power supplies (SMPS), LDO regulators, charge pumps, etc. These different converters are used for all possible input power sources and different voltages required within the product design.

A digital interface or hardware push-button controller is responsible for turning the system on and off—sometimes called soft-start. In some recent power converters, the digital interface can also be used to fine-tune the output voltages produced by the various converters. This fine-tuning is necessary in power-conscious power supply designs.

The standard for efficient power supplies

In embedded applications, power efficiency is not limited to the traditional definition of the ratio of system output power to system input power. In embedded systems, an efficient power solution should meet the following criteria: 1. When powered by batteries, the device can work for a long time; 2. Extend battery life (charge and discharge times); 3. Limit the temperature rise of components and the battery itself; 4. Provide integrated software intelligence to maximize efficiency.

In reality, there is no single guideline to maximize the efficiency of a power solution. However, designers consider the following when developing a power system: Battery life (number of charge and discharge cycles) depends on the battery's charging characteristics; for lithium-ion batteries, manufacturers generally recommend following the optimal charging current (constant current mode) and termination/pre-charge current values. When designing a charger circuit, these specifications must be strictly followed.

Battery Management

For consumer electronics, battery protection must be considered a basic feature because it is closely related to the personal safety of users. Adequate measures must be taken to detect overvoltage, undervoltage and temperature of the battery; suitable devices such as temperature-dependent resistors must be selected to ensure that the current can be automatically limited under any abnormal conditions; and a fuel gauge must be used. In addition to the normal power detection function, it can also ensure battery safety. Most fuel gauges are installed on the battery and can be used to detect battery temperature, discharge current, etc.

An often overlooked issue with power path controllers is that when switching from one supply to another, no loop should be formed between the two, no matter how short. This may require additional reverse-connected diodes or switches. Likewise, when powered from one supply, the voltage from that supply should not pass to the input of the other supply.

Since there are many available power converter topologies, choosing the right power converter is not an easy task. Generally speaking, linear regulators must be avoided when high efficiency and high output current are required.

Where a switching power supply is used, designers should ensure that the appropriate topology (buck, boost, buck-boost, charge pump, SEPIC, etc.) is used to ensure that the power supply can maintain the desired output voltage even when the battery voltage drops to the minimum operating value, which helps to extend the operating time of the equipment.

For buck converters, synchronous converters are usually more efficient than non-synchronous converters. However, the choice of architecture depends largely on the output current and duty cycle required for the converter to operate. Therefore, the slight efficiency improvement brought by using a synchronous converter is not enough to offset the increased cost.

Figure: Power management solution for a typical portable embedded system.

Different types of inductors used to filter the output ripple of switching power supplies usually have different effects on converter efficiency. Among various inductor options, inductors with low DC resistance and low magnetic loss at the operating frequency are preferred.

Thermal design should be closely tied to electrical design. The packaging of each IC or passive device must be able to handle the heat generated during normal operation. Many chip manufacturers recommend using thermal pads with vias and large pads on the PCB to better dissipate heat. Compact embedded products usually do not have room to add fans, but ventilation channels on the PCB and adequate heat dissipation measures must be considered.

Conclusion

Power supply design is often considered a pure hardware design. However, to achieve an efficient power solution, designers need to add software intelligence to the power circuit. Some basic functions of software control include detecting which power source is selected by the power path switch and reducing the supply current to unnecessary circuits when the battery is powered.

More sophisticated power management software will also include other parameters, such as the type of application running on the system, the minimum peripheral requirements, the slowest clock frequency, and the minimum voltage required to run this application, and control the status of power outputs, clock generators, and interface ICs accordingly.

遵循上述经验规则可以显著提高便携式设备的电源性能。例如，一款典型的30W多输出电源方案的整体效率可高达85到90%。目前已多家集成电路制造商可提供一系列高集成度IC，具备上述各种功能。根据不同电源要求，一些应用可能需要单芯片方案，而另一些则可能采用分立模块。毕竟，在竞争激烈的嵌入式产品市场，电池寿命和设备工作时间是影响买方选择的关键因素。