MIC2829 3G-4G USB Wireless Application Power Technology Design

Publisher:HarmonySpiritLatest update time:2012-04-09 Source: 21IC中国电子网Keywords:MIC2829  USB Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere
MIC2829 is a highly integrated power management integrated circuit (PMIC) from Micrel, designed for 3G/4G (HEDGE/LTE and WiMAX) USB wireless applications. MIC2829 is a complete power management solution that can provide power to processors, dual-standard RF (such as HEDGE/LTE or WiMAX) transceivers, power amplifiers, memory, USB-PHY related I/O interfaces and other system requirements. The input voltage is 2.7V-5.5V, with six DC buck regulators, two PWM buck regulators and 11 LDOs. It is mainly used in 4G LTE USB modems, 3G/4G (HEDGE/LTE) wireless chipsets, WiMAX modems, Express card modems, UMPC/laptop wireless data communications and portable devices. This article introduces the main features of MIC2829, block diagram, typical application block diagram and bill of materials, MIC2829 evaluation board circuit diagram and board bill of materials (BOM) used.



Figure 1. MIC2829 functional

block diagram Figure 2. MIC2829 typical application block diagram
Typical application bill of materials (BOM):
MIC2829 Evaluation Board

Figure 3. MIC2829 Evaluation Board Circuit Diagram
MIC2829 Evaluation Board Bill of Materials (BOM):
Keywords:MIC2829  USB Reference address:MIC2829 3G-4G USB Wireless Application Power Technology Design

Previous article:The main factors affecting the switching power supply
Next article:Application of parallel hybrid compensation device in the harmonic control project of railway traction station

Recommended ReadingLatest update time:2024-11-16 21:31

Design of CAN-USB bus communication system based on TMS320F2812 and USB100
Abstract: This paper introduces the design of a communication module of USB bus and CAN bus based on DSP CAN controller and USB chip, and proposes a scheme to connect CAN bus network with computer by using USB interface. By using USB100 chip, the computer RS ​​232 serial port can be upgraded to USB interface without
[Embedded]
Design of CAN-USB bus communication system based on TMS320F2812 and USB100
Data acquisition and processing system based on DSP and USB technology
  1. Introduction   Using DSP ( digital signal processor ) as the controller and connecting it to the host computer via USB (universal serial bus) will be a possible development trend of the data acquisition and processing system.   1.1 Digital Signal Processor DSP   DSP chip, also known as digital signal process
[Embedded]
Data acquisition and processing system based on DSP and USB technology
Circuit protection scheme for USB power adapter
As the functions of smart handheld devices such as mobile phones and tablets in people's hands are constantly upgraded and powerful, entertainment and personalized applications have also made the battery life of devices a dead end. In real life, we may often see friends around us carrying a mobile power bank . Wit
[Power Management]
Circuit protection scheme for USB power adapter
Dynamic siphon USB port current acquisition
Summary: This circuit utilizes all the power from the USB port by dynamically adjusting the amount of current delivered to the load, thereby siphoning power from the USB port to obtain a relatively stable (and maximum) current from the USB port. It includes a current-sense amplifier (MAX4173), a voltage reference (MAX6
[Power Management]
Dynamic siphon USB port current acquisition
Design and implementation of USB SoC
    With the widespread use of portable devices, mobile storage devices are widely used for information storage and transmission. Among the many storage devices currently available, USB flash drives have been rapidly popularized due to their small size, large capacity, easy to carry, and hot-swap support. Moreover, wit
[Microcontroller]
Design and implementation of USB SoC
Linear Technology LTC4088 - High Efficiency Battery Charger/USB Power Manager
  Features   Switching regulator makes full use of limited power drawn from USB port to charge battery and power application   180mΩ Internal Ideal Diode and Optional External Ideal Diode Controller Seamlessly Provide Low-Loss Power Path (PowerPathTM) When Input Power is Limited or Unavailable   Full-featured Li-ion
[Power Management]
Linear Technology LTC4088 - High Efficiency Battery Charger/USB Power Manager
Design of H.264 decoder chip based on USB2.0 integrated chip
The H.264/AVC standard has a series of new features that are superior to MPEG4 and H.263. Under the same reconstructed image quality, H.264 saves about 50% of the bit rate compared to H.263. However, the cost of saving the bit rate is to increase the complexity of the algorithm. Since it is no longer possible to ach
[Microcontroller]
USB development steps: Standards
Universal Serial Bus It is an external bus structure used to connect USB-compatible peripheral devices to the host. It is mainly used for medium-speed and low-speed peripherals. USB is connected to the internal system data line of the PCI bus to achieve data transmission. USB is also a communic
[Analog Electronics]
Latest Power Management Articles
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号