The first Audi model to use LED headlights was the A8L. Now Audi has introduced this lighting system to the A6L series. Except for the change in the shape of the headlights, there is no change in function between the two.
The entire LED headlight is composed of multiple groups of LED light sources, among which the LED low beam is the biggest highlight. The low beam composed of 9 LED lights can automatically adjust the lighting distance electronically. When meeting oncoming vehicles, it can automatically adjust the lighting distance of the left headlight to prevent glare to oncoming drivers. The four outer LED lights can be turned off separately according to the lighting mode, so as to meet the lighting requirements of different regional regulations.
The LED headlights are integrated with the fog light function, so there are no independent fog lights. When the rain and fog mode is turned on, the LED low beam lights and the small fog lights at the bottom of the headlight group work at the same time to provide effective lighting. In order to reduce the reflection of fog on the vehicle lights, the outermost four LED low beam lights will also be turned off in the rain and fog mode.
The turn signals and daytime running lights use the same set of LED light sources. The strip-shaped light sources can provide excellent recognition at dawn and dusk, and have become one of the external brand features of Audi models.
The taillights use slightly less LED than the headlights, but they have increased a lot compared to the previous generation. The width, brake, and turn lights are all LED light sources, and the width and brake lights are designed independently. Unlike the previous generation of modified models, the brake lights are the high-brightness mode of the width lights. The new strip width lights effectively reduce the glare caused to the drivers of the following vehicles.
Previous article:Design of intelligent control system for LED street lamps
Next article:Five production processes of LED lighting products
Recommended ReadingLatest update time:2024-11-16 16:40
- Popular Resources
- Popular amplifiers
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Sharing joy with others is worse than enjoying it alone——TI training’s “recommended courses” function is now available for public testing. We invite you to make suggestions and participate in the competition!
- [Anxinke NB-IoT Development Board EC-01F-Kit] 1. Unboxing and Hardware Appreciation
- Seeking advice from hardware experts: PWM control transistor buck-boost output waveform
- November 24 live broadcast review: NXP's embedded human machine interface solution detailed explanation (including video playback, ppt, Q&A)
- BLDC Motor Control Algorithm - FOC Brief Introduction
- PyPortal weather and clock display
- TL437x-EVM Evaluation Board Test Manual (1)
- EEWORLD University - Understanding and comparing high-speed analog-to-digital (ADC) and digital-to-analog converter (DAC) converter architectures
- Comprehensively explain the relationship between power supply PCB layout and EMC from nine aspects!
- Ask about copper plating and splitting power planes