Conventional installation methods for indoor/outdoor LED displays-EEWORLD

Collect

1) Indoor display screen installation method

Hoisting
Standard hanging parts can be used for indoor load-bearing concrete ceilings, and the length of the hanging rod depends on the site conditions. Indoor steel beams are hoisted by steel wire ropes, and the outer cover is decorated with steel pipes of the same color as the screen body.

Hanging
Ordinary hanging: Suitable for display screens with a total screen weight of less than 50kg, which can be hung directly on the load-bearing wall without leaving maintenance space.

Rotating bracket hanging:
Suitable for display screens with a weight greater than 50kg and a screen height and width greater than 1200mm. They must be installed on the load-bearing wall. Because they are generally large in area and difficult to disassemble and assemble, the maintenance space is solved by rotating the screen. Mounting

The
mounting structure is to open a hole in the wall and mount the display screen in it. The hole size is required to match the size of the display screen frame, and appropriate decoration is done. In order to facilitate maintenance, the hole in the wall must be through, otherwise a front disassembly mechanism must be used.

2) Outdoor display installation method

The outdoor led-display.cnLEDw.com/">LED display has a large area, and the design of its steel structure should consider many factors such as foundation, wind load, earthquake magnitude, waterproof, dustproof, ambient temperature, lightning protection, etc. Auxiliary equipment such as power distribution cabinets, air conditioners, axial fans, lighting, etc. should be placed in the steel structure, and maintenance facilities such as horseways and ladders should also be provided. The entire outdoor screen structure must meet the protection level below IP65.

Hanging installation

Pedestal installation

Install the outdoor screen on a platform or on a column. The column is divided into a column and a double column. In addition to the steel structure of the screen, concrete or steel columns need to be made, mainly considering the geological conditions of the foundation.

Keywords：LED Reference address：Conventional installation methods for indoor/outdoor LED displays

Previous article：High-power LED secondary optical design
Next article：Two common assembly methods for LED displays

Recommended ReadingLatest update time:2024-11-16 16:49

SAM4E MCU Tour - 6. LED Flashing Button Control

Now try controlling an LED with a button... make the LED light up when a button is pressed and turn off when it is released. The main purpose is to learn GPIO input and interrupt. 1. Circuit J39-n in the picture are several jumper sockets, located near the LCD of the development board. Make sure the jumpers are co

[Microcontroller]

SAM4E MCU Tour - 6. LED Flashing Button Control

Design of LED display screen using LabVIEW to generate fonts

　　This paper introduces a method of automatically generating character dot matrix by directly using the image processing function of LabVIEW. The program can automatically obtain dot matrix of various characters without using a special character library, and then send the display information to the single-chip microco

[Test Measurement]

Design of LED display screen using LabVIEW to generate fonts

The possibility of LED lamp design from two lamps

Let’s first look at a few pictures taken by Andrew Lloyd Photography at the Port Phillip Beach Trail in Melbourne, Australia. 　　As a patient with occupational diseases caused by lighting, I believe you must have noticed this and have a big question mark in your mind: How is the lighting effect of this walkway a

[Power Management]

The possibility of LED lamp design from two lamps

Basic characteristics of industrial display (LED) light sources

1. High luminous efficiency After decades of technological improvements, the luminous efficiency of LED has been greatly improved. Incandescent lamps and halogen lamps have a luminous efficiency of 12-24 lumens /watt, fluorescent lamps have a luminous efficiency of 50-70 lumens/watt, and sodium la

[Power Management]

Selection Guide for Different Power LED Lighting Driver Power Solutions

Requirements and solutions for general lighting applications of AC-DC powered LEDs with different power Different power AC-DC LED lighting applications have different suitable power topologies. For example, in applications with power below 80 W, the flyback topology is the standard choice; while in applications

[Power Management]

Selection Guide for Different Power LED Lighting Driver Power Solutions

High-efficiency LED power supply for street lighting based on NCP1607 and NCP1397

In recent years, the industry has shown a growing interest in ultra-high-efficiency LED lighting topologies, expecting to provide more than 90% efficiency at relatively low power levels ( 50 W), an efficiency target that is even higher than the Energy Star 2.0 external power supply efficiency requirements (more

[Power Management]

High-efficiency LED power supply for street lighting based on NCP1607 and NCP1397

LED secondary packaging technology and production process

Lighting has the advantages of high efficiency, energy saving, low carbon and environmental protection, small size, high intensity, low voltage drive, etc., combined with modern high-tech production process and control technology, it makes up for the shortcomings of traditional lighting fixtures and becomes an all-

[Power Management]

LED driver power supply detailed explanation

LED driver power is a voltage converter that converts power supply into a specific voltage and current to drive LEDs to emit light. Usually, the input of LED driver power includes high-voltage power frequency AC (i.e. mains), low-voltage DC, high-voltage DC, low-voltage high-frequency AC (such as the output of ele

[Power Management]

Popular Resources
Popular amplifiers