Introduction to the features and functions of the CA8230 single-phase power quality analyzer product

CA8230 single-phase power quality analyzer product introduction:

CA8230 is a single-phase AC+DC harmonic tester with graphical display that complies with IEC 61010-1 Class III 600V. It can be used to measure the effective value of voltage and current, power, and interference in the power distribution system, and to quickly detect the main characteristics of the power grid and track changes in various power parameters within a certain period of time.

Features:

It has a highly integrated impact-resistant shell and an excellent human-machine interface design, making its operation very simple and intuitive.

CA8230 can not only quickly detect the main characteristics of the power grid, but also record changes in power.

Its multi-tasking measurement system design can simultaneously measure power parameters, detect alarms, and continuously record trend charts of each power level.

It provides excellent flexibility, allowing customers to choose different current sensors (current clamps) to measure current, from hundreds of milliamps (MN93A) to thousands of amps (AmpFLEX).

CA8230 is specially designed for electrician technicians and engineers in the inspection and maintenance department. It is especially suitable for industrial users and power supply companies (36 to 250kVA and greater than 250kW system capacity) as a inspection and detection single-phase or three-phase low-voltage power distribution system.

CA8230 single-phase power quality analyzer features:

RMS AC voltage up to 600V.

RMS AC current up to 6,500A.

DC voltage current

Half-wave effective value, minimum value, maximum value of voltage and current

Voltage and current peak values

Suitable for grid frequencies of 50Hz or 60Hz (measuring range: 40 to 70Hz).

Crest factor of voltage and current

K factor (KF) of current (applicable to transformer)

Distortion factor DF (also called THD-R) for voltage and current.

Total harmonic distortion rate THD (also called THD-F) of voltage and current.

Active power, reactive power (capacitive and inductive), and apparent power

Power factor (PF) and displacement power factor (DPF or Cos Φ).

Total active power, reactive power (capacitive and inductive) and apparent power (with or without neutral line) of the three-phase balanced grid

Three-phase phase sequence detection (2-wire method): Displays the phase sequence of the three-phase power grid

When using ΜΝ93Α current clamp (5Α gear) or 5Α adapter box, the primary/secondary ratio of the current can be configured

Automatically identify current sensor (current clamp) model

Display voltage and current waveforms

Short time flicker (PST).

Active power, reactive power (capacitive or inductive), and apparent electric energy (total electric energy in three-phase balanced mode).

Harmonics of current and voltage up to 50th: including RMS effective value, percentage value of fundamental wave, minimum value, maximum value (single-phase mode) and order of harmonics

The harmonics of the apparent power (single-phase mode) can reach 50 times: including RMS effective value, percentage value of fundamental wave, minimum value, and maximum value