What problems are spectrum analyzers facing?

In fact, there are many measuring instruments, and as the requirements for their use become higher and higher, some problems will gradually be discovered. Of course, some manufacturers are now actively conducting research and development and design, and some problems have been solved. A relatively complete solution. Spectrum analyzer is a relatively common measuring instrument. Many problems of this measuring instrument have basically been solved. For example, in the past, everyone was more concerned about the scalability of this measuring instrument, but now it uses many standard interfaces. After that, the scalability of this device can be further enhanced. Let me introduce to you some other problems that may be encountered with this kind of measuring equipment.

As the spectrum analyzer continues to be used for displacement, people later discovered some problems. For example, when making measurements, everyone required the measurement equipment to have a wider measurement range. For example, 1G Hz can be measured, and 1000 Hz can be measured. Then tens of megahertz can also be measured. Is it possible to achieve such a large-scale measurement effect? In fact, the equipment developed by some manufacturers can already meet this requirement. Not only is the measurement range further expanded, but the capacity is also constantly increasing. For example, when measuring, frequency ranges with small intervals in between can be captured very keenly, and then they can be measured very accurately. . Then people not only require that the measuring equipment be able to measure all these data, but also require automatic calculation, automatic analysis, and even automatic printing or automatic report generation, and these functions are now available. Some measuring instruments are even equipped with a special microcomputer, which is controlled through this microcomputer system, making their use more and more automated.

When the spectrum analyzer is measuring, it was impossible for the old-fashioned equipment to display the results through curves or charts. However, these current equipment have solved this problem very well, because now The device is already equipped with a CPU, memory, and a display, and it can even be equipped with a dedicated input and output system. In this way, the equipment can achieve a higher degree of automation, and then all the measurement data can be displayed intuitively on the screen to facilitate the measurement personnel to further judge and analyze the data.

The above is an introduction to the main problems currently faced by spectrum analyzers. If you have other problems during use, please log in to Xi'an Antai Test to learn more.