Portable Hipot Tester Specifications and Technical Characteristics

DBNY-S portable withstand voltage tester is suitable for the safety withstand voltage and leakage current test of various motors, electrical appliances, instruments and meters, household appliances, and strong electrical systems. The instrument is easy to operate, safe and reliable, has good performance and is easy to maintain. It is the test equipment required to meet the test requirements of GB4706.1 "General Safety Requirements for Household and Similar Electrical Appliances" and GB9706.1 "General Safety Requirements for Medical Electrical Appliances" and GB4943, GB4793 and other national standards.   

Specifications and technical characteristics of portable voltage withstand tester    
2.1   Output voltage, basic error, leakage current, preset alarm current and tolerance are shown in Table 1  

                                                                  Table 1
2.2   Features of the product    
 a.   The display mode is digital.    
 b.   It can display the leakage current value on the tested object during the test.    
 c.   It has time preset and display, and the test time counts down.    
 d   . The alarm current value can be set arbitrarily.    
 e.   The output waveform is a 50Hz sine wave.   
2.3   See Table 2 for test time, dimensions and weight 

                                                                  Table 2
2.4   Conditions for use of withstand voltage tester  Temperature   
  0℃～40℃  Relative humidity  not more than 80%  No strong electromagnetic interference source around, no large amount of dust and corrosive gas, good ventilation.  2.5  Power supply AC  220V  Tolerance  ±10%, 50Hz