[i=s]This post was last edited by dcexpert on 2022-8-3 21:37[/i]The PCB and components from Lite-On have arrived, and the materials from Digi-Key have also arrived. We are ready to start soldering the
LED Indicator
The development board base has one power indicator LED0 (next to the power socket), and three user-programmable indicators, LED1, LED2, and LED3. The schematic diagram is as follows:butt
- Want to learn MSP430, but can't find systematic learning resources or can't learn it at first glance? Waiting for an expert online to guide you step by step;
- I don't have much time to explore MSP4
I believe many fans know that Mr. Gaosu has moved into a new office. When we were busy tidying up the laboratory, we received a board sent by a customer. After testing, the customer reported that the
CMOS circuits are very susceptible to electrostatic charges due to their high input impedance. To prevent electrostatic breakdown, standard protection circuits are added to the input terminals when CM