MTK_10A compilation environment installation [1] Install the ARM RVDS3.1 compiler to the default directory [2] Copy crack.bat, ecc.exe, FlexLMSearch.exe, readme.txt, rvds.dat to the top level of the RVDS3.1 installation directory. [3] Run crack.bat in the command line window. [4] Use a character editing tool to replace HOSTID=0026B9B09E98 in the rvds.dat file with HOSTID=ANY. The Mac address of the local network card can be obtained through ipconfig /all. It is a 6-byte HEX. After replacement, remove -. [5] Run Utilities\\LicenseWizard\\4.1\\53\\win_32-pentium\\licwizard.exe to install the cracked rvds.dat License file, which will be saved as Licenses\\rvds.bat. [6] Enter RVCT\\Programs\\3.1\\569\\win_32-pentium, and run the armcc command in the command line to see if there is a prompt that the license cannot be found. If not, the cracking is successful. [7] Unzip 10AW1032MP_HEXING36_10A_GEMINI_V17_GPRS_MMI.rar or checkout from SVN [8] Copy 7za.exe from the old project to the plutommi\\Customer\\ResGenerator directory. Copy convert.exe to the plutommi\\Customer\\ResGenerator directory. Copy make.exe to the tools directory. Copy MSYS to the tools directory [9] Copy the old project\'s tools\\Min...
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore