-
TJA1020 LIN Transceiver Application Guide
LIN Local Interconnect Network is a low-speed, maximum 20 kBaud, Class A serial bus protocol. LIN sub-buses can be used for modules such as seats, doors, roof, control panels, steering wheels, etc. It
-
[Repost] Discover Schottky diodes in life
[align=left][color=rgb(25, 25, 25)][font="]Our lives are full of technological products, such as televisions, refrigerators, computers, cars, solar street lights, etc. You have seen so many technologi
-
For a 4-layer board, is it possible to lay ground on all 4 layers?
I have drawn a 4-layer board. Can I lay ground on all 4 layers?
From the top layer to the bottom layer, they are Signal1, GND, Power, and Signal2 respectively, but the power layer has a thick power li
-
About the selection of pull-up and pull-down resistors at A and B ends of 485 bus
[size=4]Question: About RS485[/size] [size=4]Use a resistor to pull up[/size] [size=4]B uses a resistor to pull down[/size] [size=4]A and B are connected by resistors, [/size] [size=4]What are the app
-
6. [Learning LPC1768 library functions] Watchdog experiment
The purpose of the watchdog is to generate a reset when an error occurs in the microprocessor. When the watchdog is enabled, if the user does not feed the watchdog within the overflow period (reload t
- USBTMC standard instrument interface
- Answer the questions to win a gift | Choose gate drivers from Infineon, and get a 50-yuan JD card
- Talking about ucOS, why do we need an operating system?
- Protel 99 SE Getting Started Manual (Chinese Version)
- CC2541 Mini Development Kit User Experience Sharing + my love