After the project code is compiled, the following information is printed:
Info: Clock "CLK48M" has Internalfmax of 67.47 MHz between source register "GLUE_LGC:glue|MCLK" and destination register "img_
That is, the address of SEG0 and SEG1 is 00H. If I want to light up all segments of 5, but the upper four bits of 5 are at address 04H, and the lower four bits are at address 05H. It is inconvenient t
In addition to the CAN communication method, there is another low-cost communication method in automotive network communication - the LIN system. Its English name is "Local Interconnect Network". The
[size=5] There are two ways to match the bus. One is to add matching resistors. A 120Ω matching resistor should be connected between the differential ports VA and VB at both ends of the bus to reduce
[i=s] This post was last edited by Feiyangzi at 2019-1-3 13:48 [/i] Following [url=https://en.eeworld.com/bbs/thread-1065909-1-1.html]https://en.eeworld.com/bbs/thread-1065909-1-1.html[/url], we will