This post was last edited by Feiyangzi at 2019-1-3 13:48 Following
https://en.eeworld.com/bbs/thread-1065909-1-1.html, we will continue on the road. This time, we will use the online IDE to program and test Rapid IoT. Preparation for using the online IDE: A, you must log in to your account; B, edit the project on the
https://rapid-iot-studio.nxp.com/#%7B%22location%22%3A%22Studio%22%7D link. C. Create a new project and enter the project name
D. Add the components you need to the functional components on the right side of the project, connect them and set the properties. . .
1. Test the LED light. The specific compilation, downloading and burning processes are all introduced in the user manual, so I will not explain them here. The following is to make an LED flash and display function. The above picture. .
The red light flashes!!!
The blue light flashes and a string of characters is displayed
2. Test the air quality sensor + LED. Finally, an LED plus air quality sensor and display function was made
The following is the schematic diagram and configuration of the project. .
Summary: functions should be added step by step. The first time I added a lot of modules at once, nothing worked. There are also many options for component configurations, and different options have different display effects, so we still need to explore each other's ideas...
This content was created by EEWORLD forum user 飞扬自己, and if you need to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source
提升卡
变色卡
千斤顶