It is a reference design, someone has posted it,It is a digital power supply with multiple NMOS, using DSP to control different NMOS to achieve different topologiesI forgot it now, I wonder if anyone
Continued from the previous article: as followsThis register uses two bits:STEP_SEL: Select the setp_clk clock source.PLL1_SW_CLK_SEL: Select the pll1_sw_clk clock source.At this point, we can simply
After installing AD16, there will still be problems:
1. When you apply copper or delete a line in the completed PCB, the following dialog box will appear: And to delete a line, the entire PCB must be
[i=s]This post was last edited by w494143467 on 2021-6-14 17:00[/i]1. Introduction
After the communication protocol is defined, we need to start data communication with the sensor. First, choose the m
Dear experts, I encountered the problem that the OE bit of the serial port register LSR (queue status register) was 1 and could not be cleared when developing the serial port interrupt receiving and p