After CCS was upgraded from 3.3 to 5.X, CCS has changed a lot. The debugging steps of the DSP in the DaVinci chip are also different. Here is how to debug the DaVinci DSP core in CCS.
1. Create a CCS
[size=4][color=#000000][backcolor=white]Used to measure air pm2.5, this sensor estimates the particle concentration by measuring the duty cycle of the signal[/backcolor][/color][/size] [size=4][color=
When many startup teams calculate whether to start a project, they usually evaluate the BOM cost first and then judge whether the project can be undertaken.Some customers would also express their conf
[i=s]This post was last edited by bqgup on 2021-4-10 20:35[/i] ##Based on Windows system, demonstrate the RTOS projects for ARM, DSP and IPU respectively**Table of Contents** [TOC] ##1.1 The project f
Product Specification:Product DescriptionMS5614/5614T is a 12-bit four-channel output voltage DAC. The interface adopts a four-wire serial port mode and is compatible with TMS320, SPI, QSPI and Microw